Polishing and Sanding Tools are used to create the best possible surface for your finished composite part or mold. Time spent sanding and polishing molds and finished parts will pay off in the long run.
- For finished parts, a highly-polished, Class-A surface produces impressive cosmetics.
- For molds, a top quality surface finish means higher quality, repeatable parts made from the mold, and less time spent required to finish those parts.
- An improved surface finish also helps to prevent moisture and small particles from entering your part or mold, extending working life.
Click on any of the selections below to get more specific product information and pricing.
-
These two compounds work together, and pack a one-two-punch for polish after parts have been sanded. Not only do...
-
The ultimate machine-applied shine. Meguiar's Machine Glaze lets you achieve a deep, rich gloss unmatched by any...
-
Avoid leaving finger pressure marks and make the job of hand sanding a little easier. Use with any grade sandpaper...
-
3M ™ WETORDRY ™ Sponge Pads are ideal for eliminating fine scratches and finger waves...
-
Time spent sanding plugs, molds, and finished parts will dramatically improve their longevity and quality. So, it's...
-
These popular abrasive pads are coated on two sides with silicon carbide and are extremely flexible. Use them to...
-
This half lamb's wool-half synthetic pad is the best choice when time is a factor. Wool is simply a faster medium...
Keep in mind that sanding and polishing will require some elbow grease and patience. It is usually not a quick process. Sanding usually involves several different grades of sandpaper, working your way consecutively to finer and finer grits. Depending on surface area and grit, you may consider wearing a dust mask.
For the polishing phase, compounds and glaze will require an applicator, several clean towels, or a powered rotary buffer and pad. Be sure to read instructions for each product before you begin.
To learn more about the importance of a top-quality surface finish, visit the Learning Center and read the white paper, Plug Surface Preparation and Mold Surface Maintenance.
You can place your order on our website or, if you have any questions, call 1.800.838.8984 | 8 a.m. - 5 p.m. EST Mon-Fri.