UV Putty 6 oz Tube
Sunrez UV Putty is made with the 4194 UV vinyl ester resin. The base resin is thickened with various thixotropic compounds to produce a thick peanut butter like consistency. The UV putty is ideal for filling imperfections such as gouges, scratches, small holes, etc. and can be used like body filler and applied with a trowel or squeegee. As with all Sunrez products they will begin curing after mere seconds of exposure to direct sunlight so shade areas if used outdoors.
The outermost surface of the putty will remain slightly tacky after curing if a film is not used over the surface (oxygen inhibition). This can be used to your advantage if you're applying a layer of UV prepreg over the top as it will allow primary bonds to be formed between the two materials. If the putty is used as a surface coat, apply it with a squeegee to flatten out the surface and then cover it with a clear film and squeegee the film against the putty to remove any air. Then, use either the UV light kit (835-A) or set it directly in the sun to cure the putty and a tack free surface will be generated.
"California Proposition 65 WARNING: This product can expose you to Styrene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov."