Step Two Mold Polish
Water-based fast-cut compound and polish for composites and other surfaces.
To remove scratches and polish composite patterns, plugs, masters and product molds. Also to remove scratches and to clean FRP parts, metals and painted surfaces.
#1103 Step Two Mold Polish is economical, easy to use and produces superior results.
Here's why you should choose #1103 Step Two Mold Polish:
- Swirl mark-free finish - you'll achieve the ultimate finish shine with #1103 Step Two Mold Polish.
- Easy Application - apply with a brush or cloth.
- Economical - use only half as much, compared to other compounds.
- Water-based - environmentally friendly.
- Multiple-size packaging - 1 or 5 lb containers to meet a variety of manufacturing requirements.
Generally used to remove fine scratches from mold and part surfaces. Great for polishing molds, parts, and painted surfaces. Spread #1103 Step Two Mold Polish on the surface to be compounded with a brush or cloth, several square feet at a time—using one-half the normal amount - and mist the surface with water. Immediately machine buff with a clean, damp compounding pad (such as our #1104-A lambs wool buffing pad ). For best results, use machine buffers that generate at least 2500 rpm. Repeat the process to eliminate scratches from exceptionally hard surfaces. (Or if you haven't done so, first use part #1102 Step One Mold Polish ) Should the compound become dry while being buffed, re-wet again by misting the surface with water.
|Viscosity: As measured on a Brookfield Viscometer Model RVF, Spindle #6 at 10 rpm.||60,000-90,000 cps|
|Weight per Gallon||11.6+/-0.3 lbs/gallon|
|Grit (Particle) size in microns||80% are less than 40 microns particle size, 10% average 40 microns, 10% are greater than 40 microns.|
|Volatile Organic Compounds||25 g/L|
|Fails to Polish|| |
Buffing speed too slow.
Polishing pad not used
Buff at no less than 2500 rpm for best results.
Apply product with a lambs wool pad designed for polishing.
|Compound dries on Surface||Buffing speed too slow.||Buff at no less than 2500 rpm for best results.|
|Compound is watery||Outdated Product.||Replace with new compound. Compound may lose paste properties after extended storage. Use within 12 months.|
|Compound builds up on buffing pad||Too much product used.||Compound builds up on buffing pad. Too much product used. Reduce the amount of compound by as much as one half.|