5 star rating

Same Day Shipping

For orders placed before 2:30 p.m. ET


  • Item
  • Description
  • Price
  • Qty
  • 1153-A
  • FibRelease®

    Quantity Discounts

  • $27.95


For Effortless, One-Step Release of Parts

Save time, effort, materials, and money with FibRelease®. With just one quick misting onto the mold surface, you'll get multiple releases with proven results. No wax is involved.

FibRelease® is water based and contains no harmful solvents, VOC chemicals, or silicones—so it's worker safe, environmentally safe, and paint-shop ready.

Application is easy! Keep these considerations in mind:

  • Always start with a Class "A" polished mold surface.
  • Mist, or wipe, FibRelease® onto your surface and allow it to dry to a film—works in just 5 minutes!
  • Although not necessary, many fabricators spray FibRelease® before molding each part for best results.
  • Maximum service temperature is 550°F.
  • FibRelease® is compatible with all our Epoxy, Polyester and Vinyl Ester resins.

Available in a one-quart container (32 fluid U.S. ounces). warning WARNING: : This product can expose you to chemicals including 1,4-Dioxane, which is known to the State of California to cause cancer. For more information go to


This item, when ordered alone, will typically ship in a small box. Where possible, we will combine ordered items to reduce the number of boxes shipped.


FibRelease® This item is sold by the unit. *Quantity discounts are available when five or more units are purchased in one order.


5 star rating

FibRelease 1153

Jun 20, 2021  |  By Lawrence Pelletier

The first time I tried FibRelease 1153, I knew I had a winner ! The parts popped out the mold effortlessly. Couple taps with the rubber mallet, is all it took. Amazing !

Carbon Fiber twill

May 17, 2020  |  By Michael Angerstein

Some of the best carbon fiber I've worked with not only strong and durable


Feb 19, 2016  |  By Wayne Chandler

I bought a quart of FibRelease recently but did not get an opportunity to use it until a few days ago 2/17/16. I was skeptical about it, but pleasantly surprised by the ease my parts came out of the molds. The only issue I had was by my own error, in that I sprayed a little bit too much in the molds, as it goes on clear and it is water-thin. Next time I'll be extra careful to only spray a mist coat. I like it much better than PVA. Using FibRelease was simpler, easier, and much quicker.

Product Q&A