Enhance Workability for any Duratec® Product
Duratec® Reducer is the perfect solvent for Duratec® products. This specially formulated thinner/reducer is made from urethane-grade solvents as opposed to standard lacquer thinner. It matches the original solvent cut, assuring complete compatibility. Duratec® Reducer enhances flow and leveling properties and reduces orange peel and porosity. Using this thinner allows for reduced air pressure, which reduces overspray and allows for a smoother spray flow.
Duratec® is a registered trademark of DURA TECHNOLOGIES INC.WARNING: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Data SheetsProduct Data Sheet
Safety Data Sheet
ShippingDuratec Thinner is gallon (#2306-A) and gallon case (#2306-B) units can be shipped via standard ground service without hazard charges within the 48 contiguous United States. The single gallon unit (#1042-A) will be subject to a hazard charge if shipped by air. This product in the gallon case (#2306-B) unit cannot be shipped by air. Please see our Hazardous Shipping Chart for more information about hazard fees. We will consolidate items whenever possible to minimize these fees.
SizesDuratec Thinner Duratec Thinner is available in sizes that include: One gallon (#2306-A) One case of four gallons (#2306-B)
Aug 25, 2016 | By Rossitza Kotelova
The thinner works great, I had trouble spraying styroshield with our gun and the thinner made it significantly better.