Duratec® StyroShield™ Primer
For orders placed before 2:30PM EST
WARNING: This product can expose you to chemicals including Styrene & Talc containing asbestiform fibers, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Spray on Styrofoam™ to Create a Plug
Duratec® StyroShield™ Primer is an air-cured polyester primer designed to be applied directly to polystyrene foam (Styrofoam™). StyroShield™ contains microspheres that, when cured, forms a barrier that protects polystyrene foam from the chemicals in polyester-based laminating resins, gel coats, tooling resins, and other Duratec® products. With StyroShield™, low-cost polystyrene can be substituted for urethane foam in plug, mold, and pattern-building applications, making prototype molds, and sealing forms for cast concrete.
Duratec® StyroShield™ Primer is the perfect choice for:
- Making patterns from low cost polystyrene foam
- Making prototype molds or mold-direct construction
- Anchoring decorative paints onto polystyrene foam
- Sealing forms for cast concrete
- Sealing architectural fixtures
Spray StyroShield™ using an HVLP gun with a 2.5 mm or larger nozzle. Apply at least 20 mils of StyroShield™ to ensure complete coverage and surface protection.
When in storage, the microspheres in StyroShield™ will float to the top and form a hard crust. Thorough mixing is required prior to use. When possible, store StyroShield Primer container upside down.
Requires 2% MEKP.
Duratec® is a registered trademark of DURA TECHNOLOGIES INC.