Fibre Glast Shopping Cart Image
 
McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Products Category Text


Clearance Corner

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product.
NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you.



Sort Products
Products per Page


High Temp Epoxy Resin - 45 Min Cure - Clearance
Clearance – Expired Shelf Life
Excellent for High Service Temp Parts & Tooling


For tooling and components that will operate in intermediate/high temperature service environments, use this High Temp Epoxy Resin. When post-cured, this unfilled, amber epoxy laminating resin system offers maximum stability in service applications involving frequent heating and cooling cycles. #3000/3045 High Temperature Epoxy Resin easily wets-out reinforcing fabric for quick, stable fabrications.

Cure using a ramp up cure schedule requiring at most 300°F
For maximum stability in any application, an oven post-cure is strongly recommended. This epoxy laminating system will gel hard in 18 to 24 hours at 77°F, but for applications where continuous service temperature is over 250°F, a post-cure is mandatory. Allow the High Temperature Epoxy Resin to gel at room temperature before initiating an oven post-cure.

#3000/3045 High Temp Epoxy Resin can be used with #1096 High Temp Epoxy Surface Coat. When used together, High Temp Epoxy Resin and High Temp Epoxy Surface Coat can create tough, durable, heat resistant tools.
  • Mix Ratio (by weight) – 100:16
  • Pot Life @ 77°F – 45-50 minutes
  • Color – Amber
  • Maximum Service Temperature – 270ºF
Post Cure Cycle
  1. Ramp up temperature at a rate of no more than 2-5°F per minute.
  2. Hold @ 150°F, 250°F, and 300°F for 3 hours each.
  3. Ramp down temperature to 100°F at a rate of no more than 2-5°F per minute. Do not shut down the oven and leave to cool.


All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / em... 
Chavant AutoStyle Industrial Design Clay - Clearance
Clearance - Used in Video Production
Contains No Sulfur, but Works Like It Does


Professionals want the workability of a sulfur-based clay…without the risk of compromising their metal equipment. Chavant AutoStyle Industrial Design Clay is the answer.

This light brown, medium clay contains no sulfur, so there's no risk of corrosion to metal workstations, tooling, or ovens. It heats up quickly to a comfortable, creamy consistency, with recommended working temps between 125°F–135°F. It offers a number of advantages:
  • AutoStyle is 35% lighter than traditional industrial styling clay, so models are easier to move and handle.
  • Resistant to shrinking and cracking, AutoStyle holds excellent surface detail and can be milled or shaped with tools.
  • It offers exceptional cohesion and adhesion properties.
  • AutoStyle ideally suited for the transportation, product design, and special effects industries, and complements most modern computer-aided 3D modeling techniques.
  • Low-odor, non-toxic formula makes for safer working conditions.


Billet (cylinder) Size: 2 lb.

Approximate Billet Dimensions: 2-1/2" diameter x 11" long

Net Case Weight: 40 lb. (20 x 2-lb. billets)

This unit was very lightly used for the production of our product spotlight videos.

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reser... 
Chavant Le Beau Touché Clay - Clearance
Clearance - Used in Video Production
Extremely Smooth with Excellent Adhesion


This oil-based modeling clay is non-drying and can be carved and shaped easily without cracking. It features excellent adhesion with a variety of materials, including aluminum, cardboard, foam, paper, and fiberglass molding applications. Use it for temporary fillets, construction of mold parting lines, and quick mold repairs. It readily adheres to waxed surfaces, and responds to PVA separator.

It is workable at room temperature, but can be warmed to a softer, stickier consistency simply by working the clay in hand. While Le Beau Touché clays can be left out in most environments and are generally stable, this original, cream-colored version is sensitive to heat variations—avoid storing and using in temperatures above 90°F.

For a slightly firmer, less tacky clay for use where the working environment may exceed 90°F, consider our #1121 Chavant Le Beau Touché Clay HM (brown in color).

All of the Chavant clays available on FibreGlast.com are sulfur-free, non-toxic, and will not oxidize.

Each 2-lb. Block: 2-3/4" x 2-3/4" x 5"

Net Case Weight: 40 lb. (20 x 2-lb. blocks)

This unit was very lightly used for the production of our product spotlight videos.

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not... 
Out of Stock
Chavant Le Beau Touché Clay HM - Clearance
Clearance - Used in Video Production
Smooth and Adhesive for High Working Temps


This oil-based modeling clay is non-drying and can be carved and shaped easily without cracking. It features excellent adhesion with a variety of materials, including aluminum, cardboard, foam, paper, and fiberglass molding applications. Use it for temporary fillets, construction of mold parting lines, and quick mold repairs. It readily adheres to waxed surfaces, and responds to PVA separator.

Unlike the original #1120 La Beau Touché clay, this high melt (HM) formula is less sensitive to heat variations and is recommended for use where the working environment is expected to exceed 90°F. The HM formula is slightly firmer and less tacky at room temperature—it can be warmed to 105°F for ideal handling (do not exceed 115°F). It will return to its original firmness when it returns to room temperature.

For a slightly softer, more tacky clay for use where the working environment is not expected to exceed 90°F, consider our #1120 Chavant Le Beau Touché Clay (cream in color).

All of the Chavant clays available on FibreGlast.com are sulfur-free, non-toxic, and will not oxidize.

Each 2-lb. Block: 2-3/4" x 2-3/4" x 5"

Net Case Weight: 40 lb. (20 x 2-lb. blocks)

This unit was very lightly used for the production of our product spotlight videos.

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corn... 
Chavant Y2-Klay Industrial Design Clay - Clearance
Clearance - Used in Video Production
Create Accurate Prototypes and Patterns


This dark brown, hard styling clay is workable at 135°F and is hard at, or below, room temperature. It offers a number of unique advantages:
  • Y2-Klay is 30% to 40% lighter than other industrial styling clay, so models are easier to move and handle.
  • Y2-Klay is resistant to shrinking and cracking, holds excellent surface detail, and can be milled or shaped with tools.
  • Its sulfur-free, low-odor, non-toxic formula makes for safer working conditions.

Final clay forms made with Y2-Klay can be used as a plug, impression mold, or as a male or female mold. In order to use Y2-Klay as a mold-making material, the clay surface needs to be primed or top coated. To prepare the clay surface, spray three mist coats of PVA directly onto the clay. Once the PVA has dried to a film, #1041 Duratec Gray Surfacing Primer or Tooling Gel Coat can be sprayed over the PVA to obtain a proper mold surface.

PLEASE NOTE: If Y2-Klay is used as a mold-making material, the original clay form will likely be destroyed.

Billet (cylinder) Size: 1.75 lb.

Approximate Billet Dimensions: 2-1/2" diameter x 10" long

Net Case Weight: 35 lb. (20 x 1.75-lb. billets)

This unit was very lightly used for the production of our product spotlight videos.

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online s... 
Yellow Sealant Tape - Clearance
Clearance - Smashed/Damaged Rolls
Aggressive Tack to Eliminate Vacuum Bag Leaks


Yellow Sealant Tape is designed to seal vacuum bags to a variety of tooling surfaces, including aluminum, steel, nickel, graphite, and fiberglass, with aggressive tack. This extra tack makes bagging film less likely to shift or spring leaks under vacuum, but may also make it much harder to reposition once you've put it into place. Use caution when positioning.
  • Suitable for curing cycles up to 400°F
  • Strips cleanly from molds once the process is complete.

Tape Dimensions: 1/2" wide; 1/8" thick; 25 feet per roll

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you. 
Flash Tape - Clearance
Clearance - Used in Video Production
Secure Materials within Vacuum Bag Lay-Ups


Flash Tape is used to secure the position of materials within a vacuum bag—like peel ply, release film, and breather/bleeder—so they don't slide out of position prior to, or during, the vacuum process. It is designed to withstand up to 400°F, and will release cleanly, leaving no residue, once the process is complete.

Available in 1" and 2" widths; 72 yards per roll

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you. 
Mat Tape - Clearance
Clearance - Short Rolls
1-1/2 oz/sq ft mat, 4" Wide, .045" Thick.
Like the 1-1/2 Oz. Chopped Strand Mat described above, this mat tape is a 1-1/2 oz/sq. ft. chopped strand material available in a 4" width for selective reinforcement of seams, corners or edges of large parts.

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you. 
Sparkling Silver Glitterflake - Clearance
Clearance - Excess Inventory
Catch the Light with Silver Flake


Glitterflake is commonly used to repair damaged bass boats or to make any project stand out from the crowd. Flakes are 0.015" metallized polyester and are recommended for use with our #180 Gel Coat—a clear marine gel coat with excellent weathering properties and a high gloss suited to enhance the metallic glitter.

Glitterflake should be mixed thoroughly with clear gel coat more than one hour before it is to be applied. It is generally added at 10% by weight, but may be increased up to 20%. Adding more than 20% can cause curing problems including a distortion or ripple in the surface.

Get best results with Glitterflake by using it as one of three standard layers in lamination. For finished parts, these include:
  • A layer of pigmented gel coat at its base, used to conceal layers of reinforcement below.
  • The layer of Glitterflake blended with clear gel coat.
  • Ultimately, a protective layer of clear gel coat at the part's surface to optimize the metallic appearance of the flakes.


(Keep in mind that the sequence of applying these layers will change based on application. For boat repair and use with a plug, layers are added in the order as noted above. When using Glitterflake in a mold, the order is opposite: first, add the clear gel coat. Follow with Glitterflake layer, pigmented gel coat, and all subsequent reinforcement).

Check out other Fibre Glast colors in this category: Blue (#881), Red (#882), and Gold (#883).

Visit our Learning Center and read the article, Using Glitterflake , for more information.

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be orde... 
Polyurethane Die Plank - 52 lbs/cu ft - Clearance
Clearance – Item Discontinued


This medium-density Polyurethane Die Plank is an aluminum filled tooling plank designed for CNC machining of tough production fixtures. Use this die plank to quickly produce lightweight and abrasion resistant fixtures that will withstand the most demanding production environments. Make accurate checking fixtures, holding fixtures, low-volume foundry patterns, temporary models, headliner tools, and many types of tooling including vacuum-form tools.

When machined, #4103 Polyurethane Die Plank produces chips instead of undesirable dust. To repair, bond, or smooth this die plank, use #4106 Polyester Plank Patch Paste with Black BPO Cream Hardener.

Fibre Glast carries a convenient size of Polyurethane Die Plank. This size isn't available anywhere else! For small to medium sized projects, we have the perfect size plank!
  • Grey
  • Density – 52 lbs/ft3
  • Hardness – 75 Shore D
  • Heat Deflection Temperature @ 264 psi – 188°F
  • Tough, abrasion-resistant alternative to aluminum
  • *MACHINE ONLY WITH CARBIDE TOOLS


All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you.  
Styrene Thinner - Clearance
Clearance - Open Can, used for video production
General Purpose Styrene


Styrene is primarily used to thin polyester resin and gel coat before use. This is not a necessary step for the resins or gel coat on FibreGlast.com, but simply a preference for handling purposes.
  • When added to polyester resin, it enables and speeds the resin infusion process for vacuum bagging.
  • Fabricators may thin gel coat 2–5% with styrene to make them more suitable for heavy spray equipment.


All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you. 
5 Gallon Resin Bucket - Discontinued
Our plastic mixing containers will stand up to resins, thinners and solvents.  

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you. 
Desert Storm Camo Chromaveil™ (Discontinued)
Discontinued
48" Wide, Vertical Repeat: 35.90". Horizontal Repeat: 35.90".
Desert Storm required a unique camo pattern that is still used today in many applications and is still effective for many desert camouflage settings. This Chromaveil™ captures the detail of the camo and is suitable for a variety of military, commercial or consumer fabrications.

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you. 
Better than Tile™ Chromaveil™ (Discontinued)
Discontinued
48" Wide, Vertical Repeat: 0.00". Horizontal Repeat: 0.00".
Real ceramic tile has always been limited to tile sizes and requires the household nuisance of grout cleaning. "Fake ceramic tile" eliminates the grout but never completely achieves the rich, deep look of ceramic. This Chromaveil™ has a classic grid pattern that fits today's consumer expectations regarding household sanitary-ware such as tubs or showers. However, this Chromaveil™ is better than tile in that the depth and richness of this pattern would not be achievable in tile. Additionally, the 0" repeat of this pattern results in virtually no waste.

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you. 
Better than Granite™ Chromaveil™ (Discontinued)
Discontinued
48" Wide, Vertical Repeat: 25.20". Horizontal Repeat: 21.65".
Besides the expense of authentic granite, many homeowners find granite outside the kitchen to be uncomfortably cold and a nuisance to clean. This Chromaveil™ is better than granite because it achieves the rich, deep look of granite without the challenges of removing water spots or avoiding direct contact.

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you. 
Stonewall™ Chromaveil™ (Discontinued)
Discontinued
48" Wide, Vertical Repeat: 18.50". Horizontal Repeat: 17.99".
Stonewall™ offers an exciting rich, earthy pattern that can transform traditional fabrications into works of art. Stonewall™ Chromaveil™ creates a pattern of blues, greens and hints of pink that will intrigue and excite anyone viewing a Stonewall™ fabrication. Architectural columns, pools, hot tubs – there is no limit to the possibilities of Stonewall™ Chromaveil™.

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you. 
Irwin® ProTouchTM Coping Saw - Discontinued
Discontinued
For The Round Cuts 
This is a professional grade coping saw that gives you the ability to cut virtually any shape or pattern. This saw has two different blade options which allow the user to choose the type of cut needed. The 2130 comes with a handle and coarse blade. Blade length 6 ½ inches and frame depth 5 ½ inches. The 2131 Course Replacement Blades have 17 yeeth per Inch and the 2132 Fine Replacement Blades have 21 teeth per Inch.  

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you. 
Paint Trays and Liners
Discontinued
Quick and Easy Resin Application 
Paint trays and liners make a messy job easier. Remember that you can only work with catalyzed resin for about 20 minutes so don't mix too big of a batch! 

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you. 
Scoops - Discontinued
Discontinued
Perfect for Fillers 
These Polypropylene Scoops have a smooth surface which is great for the release of small particles like microballons and fillers. 

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you. 
Saturation Roller Extension Handle - Discontinued
Discontinued
These extension handles are perfect for use with our 4", 7" and 9" Roller Cages. Extends from 3 to 6 feet for comfortable use when laminating large composites 

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you. 
Bergolin Putty Cartridge, 400 ml - Past Expiration
Past Expiration
RAL COLOR - 7035
This pigmented Putty is a proven and tested, high-performance coating system for repairing rotor blades. Achieve fast, safe and superior results by using this material on repairs that require elasticity and maximum durability. The two-component cartridge can be carried anywhere and no measurement is required when dispensing.

Advantages:
Easily dispensed and mixed. Extremely portable. Fast curing. Solvent free, Excellent exterior durability. Elasticity for temperature fluctuations and substrate movement.

Properties:
Dispenses product at a ratio of 2:1 with hardener. Fast setting within 5 minutes. Tack free after 60 minutes.

Mixing:
Place cartridge kit in appropriate dispenser, remove ring and plug from cartridge, dispense amount required, and mix and apply. Hold the cartridge in an upward angle and pull handle until both products dispense evenly. Dispense the amount required into a container. Mix well until uniform. Dispense and mix only enough product that can be processed within 5 minutes. Apply using a hand trowel or spreader until uniform and even. This putty can be continuously coated once the mixed product begins to set. There are no solvents to flash or remove prior to recoat or to overlap. The reacted filler should be sanded prior to recoat after 24 hours of curing. Does not require an additional topcoat. (A topcoat can be used, if required after sanding the putty.)

Use #2917 Bergolin Dual Cartridge Dispenser 400 ml for dispensing.

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fu... 

You can place your order right here on our website or, if you have any questions, call 1.800.838.8984 | 8:00am - 8:00pm EST Mon-Fri.


Fibre Glast Blog  Materials Calculator  Shipping Information  ISO Certification
 
Fibre Glast Development Corp.
385 Carr Drive
Brookville, OH 45309
Phone: 800-838-8984
Fax: 937-833-6555
Email: customerservice@fibreglast.com

Facebook
Visa, MasterCard, Discover, American Express, & Purchase Orders Gladly Accepted