 |
 |
 |
 |
 |
Dispensing
 |
|
Shop Favorite These unique bottles are made to accurately dispense MEKP. The 16 oz bottle is graduated to measure up to 35 cc's at a time, while the 32 oz bottle can measure up to 100 cc's at a time. Simply squeeze the bottle until the upper vial is full, then release pressure on the bottle, leaving a precisely measured amount of catalyst in the vial. The MEKP can then be poured out with no dripping.  |
 |
|
Safe and Convenient Perfect for screwing onto our 1oz MEKP bottles! These caps eliminate messy pouring, allow measurement by drops and can be capped for clean storage.  |
 |
|
Pumps Any Resin, Any Ratio Eliminate messy cans, drips and spills. Easy single stroke pumps fit right into cans with accurate dispensing every time! To use with 3 to 1 mix, simply depress the pump 3 times for resin and once for cure. Clean with acetone between uses. Different cans have different sized lids. Be sure to purchase the correct pump for your can! Our 824-A Resin Pump will fit only quart and gallon containers. For 5-gallon pails, our 823-A Resin Pump contains a wider lid and extended shaft attachment. |
 |
|
Perfect for Fillers These Polypropylene Scoops have a smooth surface which is great for the release of small particles like microballons and fillers. |
 |
|
Easy drum pouring For standard 1" bungs |
 |
|
Will stand up to resins or acetone! Funnels are always handy in a composite shop. Large funnels facilitate pouring from 5 gallon pails and small funnels control pours from high viscosity materials like epoxy resin when measuring. |
 |
|
Effectively Measure Small Amounts of Liquid Syringes are handy when small, precise measurement is necessary. The 30 ml Syringe without needles will accept 1/8" I.D. tubing or # 106 needles. The 60 ml syringe has a catheter tip to help control dispensing and comes with a cap. |
 |
|
The only way to know wet gel coat mil thickness This simple tool can save hundreds of dollars in damaged material and labor. This is the only accurate method to determine gel coat thickness, and to achieve repeatable high quality results. Place the edge into the wet film, the last tooth marked is the thickness. |
 |
|
Get the Perfect Mix Every Time This versatile scale is the most accurate way to measure resin, regardless of the mix ratio. Also, weigh your dry fabric and only mix enough resin to achieve the desired 40-50% hand lay-up ratio. This scale will measure up to 5lbs or 2000g with accuracy to 0.1 oz/2g. Measure the resin, re-zero (tare) the scale, and pour in the proper amount of hardener. Mixing couldn't be easier. |
 |
|
Mix Any Ratio These containers are ideal for mixing epoxy resins and polyurethane foams. The graduations display volumetric ratios for all kinds of mixes. You can add epoxy and then the hardener right on top or use two containers to mix later. Keep several pitchers on hand when mixing large batches of foam. Pour it, have it ready and you can mix it as you need it. In addition to the various mix ratios, the 16 and 24 oz. cups are graduated in milliliters and ounces. The 2.5 and 4 qt. pitchers are graduated in quarts, ounces, liters and milliliters. |
 |
|
For Accurate Fluid Measurements The single scale, raised numerals allow for easy reading and large spouts facilitate pouring. These durable Polypropylene Cylinders easily stand up to resin and acetone for repeated use. They are perfect for pre-measuring resins and foams for later mixing. Graduated in milliliters only. |
 |
|
Graduated in ml and oz The translucent beakers are simple graduated disposable cups with a small spout to control pouring. The Tri-Pour Beakers have a special 3 spout design that is surprisingly handy for drip free pours. The simple paper inserts provide a short term cover when working with polyester, vinyl ester, epoxy resins or small batches of foam. |
 |
|
Long a staple of composite shops, these graduated cups are ideal for quick, easy measuring.
|
 |
|
Will stand up solvents. Graduated in ml and oz.
|
 |
|
For pouring, scooping and measuring, these handy cups are ideal for resins, foam, fillers or mixes.
|
 |
|
#55 is for both teaspoon and tablespoon measurements in one tool. Will not stand up to acetone.
|
385 Carr Drive
Brookville, OH 45309
Phone: 800-838-8984
Fax: 937-833-6555
Email: customerservice@fibreglast.com
