Step 1 and 2 Mold Polish
Produce Lasting, High-Gloss Polished Surfaces
These two compounds work together, and pack a one-two-punch-for-polish after parts have been sanded. Not only do they produce an impressive shine, but both are formulated so that fabricators use only about half the amount of compound compared to traditional materials.
- Step One picks up where sanding leaves off and removes scratches left behind by 600- to 1000-grit sandpaper. This fast-cutting compound will also remove styrene and wax build-up from molds. Step One is blue in color.
- Follow-up with Step Two to remove even finer scratches and produce an exceptionally high-gloss surface. Step Two is white in color.
Both compounds are water based, and just right for polishing FRP parts, molds, and even painted surfaces.
For best results, apply #1102 and #1103 with a powered rotary buffer at 2500 rpms, and use with our #1104-A buffing pads.
Mold Polish is available in a variety of sizes that include:
Step 1, 1 lb. can (#1102-A)
Step 1, 5 lb. can (#1102-B)
Step 2, 1 lb. can (#1103-A)
Step 2, 5 lb. can (1103-B)