Learning Center
Materials Calculator
Industries Served
RAL 6028 - Pine Green
Details
Details
Color Gel Coat
Our Color Gel Coats are mixed to perfectly match the color of your choice. In addition to our RAL colors, we have 720 more colors of Gel Coat available when you call in.
Color Gel Coat is designed to be used in mold to produce UV resistant, blister resistant, high-quality parts when laying up polyester or vinyl ester parts. They can be used in repair applications with an air inhibitor such as Duratec High Gloss Additive.
Color Gel Coats are available in quart, gallon or five-gallon sizes. Gel Coat kits are available in quart, gallon and 4-gallon cases and come with (#69) MEKP catalyst. One gallon of gel coat will cover approximately 40-80 square feet, depending upon application.
What Is RAL 6028 Pine Green Color Gel Coat?
RAL 6028 Pine Green Color Gel Coat is a made-to-order polyester gel coat that brings the RAL 6028 Pine Green standard to composite parts. Unlike paint, which sits on the surface, this gel coat is the first layer laid into the mold, so the Pine Green color becomes the structural outer face of the finished part itself.
Why Choose RAL 6028 Pine Green Color Gel Coat?
Pine Green is a deep, cool green named after pine trees, with a rich, natural quality and a slight blue undertone that sets it apart from the warmer dark greens in the RAL range. It is used on outdoor, architectural, and premium decorative composite parts.
Fibre Glast matches it precisely to the RAL 6028 standard, so the color is consistent and repeatable across production runs. For physical color confirmation before ordering, the #4008-A RAL Color Book has printed swatches of all 188 RAL colors.
What Are the Best Applications for RAL 6028 Pine Green Color Gel Coat?
Outdoor composite parts, architectural panels, and premium decorative applications where a deep, cool pine green finish is specified. For open-air repair work, combine with Duratec Hi-Gloss Additive to allow a tack-free cure.
How Should RAL 6028 Pine Green Color Gel Coat Be Used for Best Results?
Catalyze RAL 6028 Pine Green Color Gel Coat with #69 MEKP at 1.5% to 2.5% and apply by spraying over a properly prepared mold surface. Build thickness in 4 to 5 passes of about 5 mils each, waiting 15 to 20 minutes between coats, until the total film reaches 20 to 25 mils.
Check thickness with the #122-A Gel Coat Thickness Gauge as you go. Thin with #70 Styrene Thinner or Duratec #1039/#1040 if spray viscosity needs adjustment. One gallon covers 40 to 80 square feet. Pine Green Color Gel Coat is made to order and all sales are final.
Technical Specifications
Color: RAL 6028, Pine Green
Catalyzation: #69 MEKP at 1.5% to 2.5%
Application: 4 to 5 coats of about 5 mils, 20 to 25 mils total; spraying recommended
Coverage: Approximately 40 to 80 square feet per gallon
Thin with: #70 Styrene Thinner or #1039/#1040 Duratec Clear Hi-Gloss Gel Coat Additive
Available Sizes and SKUs
#710-A - Quart
#710-B - Gallon
#710-C - 5-gallon pail
#710/69-A - Quart kit with 1 x #69 MEKP
#710/69-B - Gallon kit with 3 x #69 MEKP
#710/69-BK - Case of 4 gallons with 9 x #69 MEKP
Every product Fibre Glast sells is First Quality Guaranteed, so you can color your parts to RAL 6028 with confidence.
PLEASE NOTE: RAL is an internationally recognized color matching system used for paints and coatings. The RAL colors displayed on this website use a three-color display (RGB) and will not reflect the exact color distinguished by RAL Standards. For an accurate color depiction, you can purchase the #4008-A RAL Color Book which contains samples of the 188 RAL colors.
'No Return' Policy - All Color Gel Coats are made-to-order; therefore, cannot be returned to inventory. All sales of Color Gel Coat are final.
Shipping
Shipping
Sizes
Sizes
WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov
