Learning Center
Materials Calculator
Industries Served
RAL 6025 - Fern Green
Details
Details
Color Gel Coat
Our Color Gel Coats are mixed to perfectly match the color of your choice. In addition to our RAL colors, we have 720 more colors of Gel Coat available when you call in.
Color Gel Coat is designed to be used in mold to produce UV resistant, blister resistant, high-quality parts when laying up polyester or vinyl ester parts. They can be used in repair applications with an air inhibitor such as Duratec High Gloss Additive.
Color Gel Coats are available in quart, gallon or five-gallon sizes. Gel Coat kits are available in quart, gallon and 4-gallon cases and come with (#69) MEKP catalyst. One gallon of gel coat will cover approximately 40-80 square feet, depending upon application.
What Is RAL 6025 Fern Green Color Gel Coat?
RAL 6025 Fern Green Color Gel Coat is a polyester gel coat matched to the RAL 6025 Fern Green standard, made to order for precise color repeatability. It is laid into the mold before the structural laminate, forming the hard, colored outer surface of the finished composite part. The Fern Green is integral to the gel coat, not a coating applied afterward.
Why Choose RAL 6025 Fern Green Color Gel Coat?
Fern Green is a soft, natural medium green that evokes the look of fern foliage. Its slightly muted saturation gives it a relaxed, organic quality that sits comfortably between the brighter greens and the darker olives in the RAL range. Fibre Glast matches it precisely to the RAL 6025 standard, so the color is consistent and repeatable across production runs. For physical color confirmation before ordering, the #4008-A RAL Color Book has printed swatches of all 188 RAL colors.
What Are the Best Applications for RAL 6025 Fern Green Color Gel Coat?
Outdoor composite parts, nature-themed decorative panels, and applications where a soft, natural medium green is the specification. For open-air repair work, combine with Duratec Hi-Gloss Additive for a tack-free cure.
How Should RAL 6025 Fern Green Color Gel Coat Be Used for Best Results?
RAL 6025 Fern Green Color Gel Coat is best applied by spraying over a clean, properly prepared mold surface. Catalyze with #69 MEKP at 1.5% to 2.5%, then build the film in 4 to 5 coats of roughly 5 mils each, giving each coat 15 to 20 minutes before applying the next, for a total film thickness of 20 to 25 mils.
Confirm thickness with the #122-A Gel Coat Thickness Gauge. Thin to spray viscosity with #70 Styrene Thinner or Duratec #1039/#1040 Clear Hi-Gloss Additive as needed. Expect 40 to 80 square feet of coverage per gallon. Made to order; all Color Gel Coat sales are final.
Technical Specifications
Color: RAL 6025, Fern Green
Catalyzation: #69 MEKP at 1.5% to 2.5%
Application: 4 to 5 coats of about 5 mils, 20 to 25 mils total; spraying recommended
Coverage: Approximately 40 to 80 square feet per gallon
Thin with: #70 Styrene Thinner or #1039/#1040 Duratec Clear Hi-Gloss Gel Coat Additive
Available Sizes and SKUs
#710-A - Quart
#710-B - Gallon
#710-C - 5-gallon pail
#710/69-A - Quart kit with 1 x #69 MEKP
#710/69-B - Gallon kit with 3 x #69 MEKP
#710/69-BK - Case of 4 gallons with 9 x #69 MEKP
Every product Fibre Glast sells is First Quality Guaranteed, so you can color your parts to RAL 6025 with confidence.
PLEASE NOTE: RAL is an internationally recognized color matching system used for paints and coatings. The RAL colors displayed on this website use a three-color display (RGB) and will not reflect the exact color distinguished by RAL Standards. For an accurate color depiction, you can purchase the #4008-A RAL Color Book which contains samples of the 188 RAL colors.
'No Return' Policy - All Color Gel Coats are made-to-order; therefore, cannot be returned to inventory. All sales of Color Gel Coat are final.
Shipping
Shipping
Sizes
Sizes
WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov
