Learning Center
Materials Calculator
Industries Served
RAL 6024 - Traffic Green
Details
Details
Color Gel Coat
Our Color Gel Coats are mixed to perfectly match the color of your choice. In addition to our RAL colors, we have 720 more colors of Gel Coat available when you call in.
Color Gel Coat is designed to be used in mold to produce UV resistant, blister resistant, high-quality parts when laying up polyester or vinyl ester parts. They can be used in repair applications with an air inhibitor such as Duratec High Gloss Additive.
Color Gel Coats are available in quart, gallon or five-gallon sizes. Gel Coat kits are available in quart, gallon and 4-gallon cases and come with (#69) MEKP catalyst. One gallon of gel coat will cover approximately 40-80 square feet, depending upon application.
What Is RAL 6024 Traffic Green Color Gel Coat?
RAL 6024 Traffic Green Color Gel Coat is a made-to-order polyester gel coat matched to RAL 6024, Traffic Green. In polyester and vinyl ester composite construction, gel coat is the first layer applied to the mold and becomes the smooth, colored outer skin of every part pulled from it. The Traffic Green color runs through the gel coat material itself rather than sitting on top as a secondary finish.
Why Choose RAL 6024 Traffic Green Color Gel Coat?
Traffic Green is a clean, medium green specifically standardized for use on traffic infrastructure and safety applications. It is the green seen on road signs, safety barriers, and public infrastructure composite parts across Europe and internationally. Fibre Glast matches it precisely to the RAL 6024 standard, so the color is consistent and repeatable across production runs. For physical color confirmation before ordering, the #4008-A RAL Color Book has printed swatches of all 188 RAL colors.
What Are the Best Applications for RAL 6024 Traffic Green Color Gel Coat?
Traffic infrastructure composites, road safety barriers, and public structures where the standardized Traffic Green finish is required. It can also be used in open-air repair applications when combined with Duratec Hi-Gloss Additive.
How Should RAL 6024 Traffic Green Color Gel Coat Be Used for Best Results?
Apply RAL 6024 Traffic Green Color Gel Coat by spraying onto a properly prepared mold surface, catalyzed with #69 MEKP at 1.5% to 2.5%. Build up 4 to 5 coats at about 5 mils per coat, allowing 15 to 20 minutes between each, for a finished thickness of 20 to 25 mils total. The #122-A Gel Coat Thickness Gauge takes the guesswork out of film build. Use #70 Styrene Thinner or Duratec #1039/#1040 to reach spray viscosity if needed. One gallon yields 40 to 80 square feet of coverage. As a made-to-order product, all Color Gel Coat sales are final.
Technical Specifications
Color: RAL 6024, Traffic Green
Catalyzation: #69 MEKP at 1.5% to 2.5%
Application: 4 to 5 coats of about 5 mils, 20 to 25 mils total; spraying recommended
Coverage: Approximately 40 to 80 square feet per gallon
Thin with: #70 Styrene Thinner or #1039/#1040 Duratec Clear Hi-Gloss Gel Coat Additive
Available Sizes and SKUs
#710-A - Quart
#710-B - Gallon
#710-C - 5-gallon pail
#710/69-A - Quart kit with 1 x #69 MEKP
#710/69-B - Gallon kit with 3 x #69 MEKP
#710/69-BK - Case of 4 gallons with 9 x #69 MEKP
Every product Fibre Glast sells is First Quality Guaranteed, so you can color your parts to RAL 6024 with confidence.
PLEASE NOTE: RAL is an internationally recognized color matching system used for paints and coatings. The RAL colors displayed on this website use a three-color display (RGB) and will not reflect the exact color distinguished by RAL Standards. For an accurate color depiction, you can purchase the #4008-A RAL Color Book which contains samples of the 188 RAL colors.
'No Return' Policy - All Color Gel Coats are made-to-order; therefore, cannot be returned to inventory. All sales of Color Gel Coat are final.
Shipping
Shipping
Sizes
Sizes
WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov
