RAL 5022 - Night Blue

What Is RAL 5022 Night Blue Color Gel Coat?

RAL 5022 Night Blue Color Gel Coat is a made-to-order polyester gel coat matched to RAL 5022, Night Blue. In polyester and vinyl ester composite construction, gel coat is the first layer applied to the mold and becomes the smooth, colored outer skin of every part pulled from it. The Night Blue color runs through the gel coat material itself rather than sitting on top as a secondary finish.

Why Choose RAL 5022 Night Blue Color Gel Coat?

Night Blue is a deep, dark blue with an atmospheric, nocturnal quality that gives it a moody, sophisticated character. Its darkness and depth make it a strong specification for premium architectural composite panels, automotive parts, and consumer products where a deep, night-sky inspired blue finish is required. Fibre Glast matches it precisely to the RAL 5022 standard, so the color is consistent and repeatable across production runs. For physical color confirmation before ordering, the #4008-A RAL Color Book has printed swatches of all 188 RAL colors.

What Are the Best Applications for RAL 5022 Night Blue Color Gel Coat?

Premium architectural composite panels, automotive parts, and consumer products where a deep, dark night blue finish adds atmospheric character. For open-air repair applications, combine with Duratec Hi-Gloss Additive to cure tack free.

How Should RAL 5022 Night Blue Color Gel Coat Be Used for Best Results?

Apply RAL 5022 Night Blue Color Gel Coat by spraying onto a properly prepared mold surface, catalyzed with #69 MEKP at 1.5% to 2.5%. Build up 4 to 5 coats at about 5 mils per coat, allowing 15 to 20 minutes between each, for a finished thickness of 20 to 25 mils total. The #122-A Gel Coat Thickness Gauge takes the guesswork out of film build. Use #70 Styrene Thinner or Duratec #1039/#1040 to reach spray viscosity if needed. One gallon yields 40 to 80 square feet of coverage. As a made-to-order product, all Color Gel Coat sales are final.

Technical Specifications

Color: RAL 5022, Night Blue

Catalyzation: #69 MEKP at 1.5% to 2.5%

Application: 4 to 5 coats of about 5 mils, 20 to 25 mils total; spraying recommended

Coverage: Approximately 40 to 80 square feet per gallon

Thin with: #70 Styrene Thinner or #1039/#1040 Duratec Clear Hi-Gloss Gel Coat Additive

Available Sizes and SKUs

#710-A - Quart

#710-B - Gallon

#710-C - 5-gallon pail

#710/69-A - Quart kit with 1 x #69 MEKP

#710/69-B - Gallon kit with 3 x #69 MEKP

#710/69-BK - Case of 4 gallons with 9 x #69 MEKP

Every product Fibre Glast sells is First Quality Guaranteed, so you can color your parts to RAL 5022 with confidence.