Learning Center
Materials Calculator
Industries Served
RAL 5014 - Pigeon Blue
Details
Details
Color Gel Coat
Our Color Gel Coats are mixed to perfectly match the color of your choice. In addition to our RAL colors, we have 720 more colors of Gel Coat available when you call in.
Color Gel Coat is designed to be used in mold to produce UV resistant, blister resistant, high-quality parts when laying up polyester or vinyl ester parts. They can be used in repair applications with an air inhibitor such as Duratec High Gloss Additive.
Color Gel Coats are available in quart, gallon or five-gallon sizes. Gel Coat kits are available in quart, gallon and 4-gallon cases and come with (#69) MEKP catalyst. One gallon of gel coat will cover approximately 40-80 square feet, depending upon application.
What Is RAL 5014 Pigeon Blue Color Gel Coat?
RAL 5014 Pigeon Blue Color Gel Coat is a polyester gel coat precision-formulated to the RAL 5014 Pigeon Blue standard. Gel coat goes into the mold first, before any reinforcement, and becomes the finished outer surface of the part. Because the Pigeon Blue color is in the gel coat resin itself, it is part of the surface permanently rather than a topcoat that can be worn away.
Why Choose RAL 5014 Pigeon Blue Color Gel Coat?
Pigeon Blue is a soft, cool blue with a gentle, muted quality that gives it a calm, refined character. Its understated tone makes it a versatile specification for interior composite panels, architectural parts, and consumer products where a soft, pigeon-toned blue finish is preferred. Fibre Glast matches it precisely to the RAL 5014 standard, so the color is consistent and repeatable across production runs. For physical color confirmation before ordering, the #4008-A RAL Color Book has printed swatches of all 188 RAL colors.
What Are the Best Applications for RAL 5014 Pigeon Blue Color Gel Coat?
Interior composite panels, architectural parts, and consumer products where a soft, muted pigeon blue finish is the specification. It can also be used for open-air repairs when combined with Duratec Hi-Gloss Additive.
How Should RAL 5014 Pigeon Blue Color Gel Coat Be Used for Best Results?
RAL 5014 Pigeon Blue Color Gel Coat requires careful film build for best results. Catalyze with #69 MEKP at 1.5% to 2.5% and spray over a properly prepared mold surface. Apply 4 to 5 coats of about 5 mils each, allowing 15 to 20 minutes between coats, building to a total of 20 to 25 mils. The #122-A Gel Coat Thickness Gauge helps keep film build consistent across the part. Thin with #70 Styrene Thinner or Duratec #1039/#1040 as needed for spray viscosity. Coverage is 40 to 80 square feet per gallon. This is a made-to-order color and all sales are final.
Technical Specifications
Color: RAL 5014, Pigeon Blue
Catalyzation: #69 MEKP at 1.5% to 2.5%
Application: 4 to 5 coats of about 5 mils, 20 to 25 mils total; spraying recommended
Coverage: Approximately 40 to 80 square feet per gallon
Thin with: #70 Styrene Thinner or #1039/#1040 Duratec Clear Hi-Gloss Gel Coat Additive
Available Sizes and SKUs
#710-A - Quart
#710-B - Gallon
#710-C - 5-gallon pail
#710/69-A - Quart kit with 1 x #69 MEKP
#710/69-B - Gallon kit with 3 x #69 MEKP
#710/69-BK - Case of 4 gallons with 9 x #69 MEKP
Every product Fibre Glast sells is First Quality Guaranteed, so you can color your parts to RAL 5014 with confidence.
PLEASE NOTE: RAL is an internationally recognized color matching system used for paints and coatings. The RAL colors displayed on this website use a three-color display (RGB) and will not reflect the exact color distinguished by RAL Standards. For an accurate color depiction, you can purchase the #4008-A RAL Color Book which contains samples of the 188 RAL colors.
'No Return' Policy - All Color Gel Coats are made-to-order; therefore, cannot be returned to inventory. All sales of Color Gel Coat are final.
Shipping
Shipping
Sizes
Sizes
WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov
