Learning Center
Materials Calculator
Industries Served
RAL 1015 - Light Ivory
Details
Details
Color Gel Coat
Our Color Gel Coats are mixed to perfectly match the color of your choice. In addition to our RAL colors, we have 720 more colors of Gel Coat available when you call in.
Color Gel Coat is designed to be used in mold to produce UV resistant, blister resistant, high-quality parts when laying up polyester or vinyl ester parts. They can be used in repair applications with an air inhibitor such as Duratec High Gloss Additive.
Color Gel Coats are available in quart, gallon or five-gallon sizes. Gel Coat kits are available in quart, gallon and 4-gallon cases and come with (#69) MEKP catalyst. One gallon of gel coat will cover approximately 40-80 square feet, depending upon application.
What Is RAL 1015 Light Ivory Color Gel Coat?
RAL 1015 Light Ivory Color Gel Coat is a made-to-order polyester gel coat matched to the RAL 1015 standard. It is applied first in the mold, forming the outermost surface layer of the finished part. The Light Ivory color is built into the material, not painted on, so it cannot chip or wear away from the surface.
Why Choose RAL 1015 Light Ivory Color Gel Coat?
Light Ivory is a very light, delicate version of ivory with a barely-there warmth that gives it an almost-white quality. Its subtle warmth makes it a refined choice for interior composite panels, premium furniture components, and architectural parts where a light, warm off-white is preferred over pure white. Fibre Glast matches it precisely to the RAL 1015 standard, so the color is consistent and repeatable across production runs. For physical color confirmation before ordering, the #4008-A RAL Color Book has printed swatches of all 188 RAL colors.
What Are the Best Applications for RAL 1015 Light Ivory Color Gel Coat?
Interior composite panels, premium furniture components, and architectural parts where a delicate, light ivory finish is the specification. For open-air repair applications, combine with Duratec Hi-Gloss Additive to cure tack free.
How Should RAL 1015 Light Ivory Color Gel Coat Be Used for Best Results?
RAL 1015 Light Ivory Color Gel Coat is catalyzed with #69 MEKP at 1.5% to 2.5%. Spraying is the recommended application method for consistent film build. Work in 4 to 5 coats of approximately 5 mils each with 15 to 20 minutes between coats, targeting a total thickness of 20 to 25 mils. Use the #122-A Gel Coat Thickness Gauge to verify. If thinning is needed for spray viscosity, use #70 Styrene Thinner or Duratec #1039/#1040 Clear Hi-Gloss Additive. One gallon covers 40 to 80 square feet depending on application method. This is a made-to-order color and all sales are final.
Technical Specifications
Color: RAL 1015, Light Ivory
Catalyzation: #69 MEKP at 1.5% to 2.5%
Application: 4 to 5 coats of about 5 mils, 20 to 25 mils total; spraying recommended
Coverage: Approximately 40 to 80 square feet per gallon
Thin with: #70 Styrene Thinner or #1039/#1040 Duratec Clear Hi-Gloss Gel Coat Additive
Available Sizes and SKUs
- #710-A - Quart
- #710-B - Gallon
- #710-C - 5-gallon pail
- #710/69-A - Quart kit with 1 x #69 MEKP
- #710/69-B - Gallon kit with 3 x #69 MEKP
- #710/69-BK - Case of 4 gallons with 9 x #69 MEKP
Every product Fibre Glast sells is First Quality Guaranteed, so you can color your parts to RAL 1015 with confidence.
PLEASE NOTE: RAL is an internationally recognized color matching system used for paints and coatings. The RAL colors displayed on this website use a three-color display (RGB) and will not reflect the exact color distinguished by RAL Standards. For an accurate color depiction, you can purchase the #4008-A RAL Color Book which contains samples of the 188 RAL colors.
'No Return' Policy - All Color Gel Coats are made-to-order; therefore, cannot be returned to inventory. All sales of Color Gel Coat are final.
Shipping
Shipping
Sizes
Sizes
WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov
