Marine Spray Adhesive

Details

Industrial strength contact adhesive with zero VOCs.

1604-A Marine Adhesive is a high performance industrial strength contact adhesive formulated with zero VOCs to comply with CA and OTC state regulations. Water resistant and temperature resistant to over 200°F, 1604-A is designed for bonding a wide range of substrates to include decorative laminates and veneers, fiberglass, glass, upholstery, fabrics, foam, boat headliners, cork and particle board.

What Is Marine Spray Adhesive?

1604-A Marine Adhesive is a high performance industrial strength contact adhesive formulated with zero VOCs to comply with California and OTC state regulations. It is water resistant and temperature resistant to over 200°F, and bonds a wide range of substrates including decorative laminates and veneers, fiberglass, glass, upholstery, fabrics, foam, boat headliners, cork, and particle board.

Why Choose Marine Spray Adhesive?

1604-A combines zero VOCs, high temperature resistance, and postformability in a single adhesive. The zero-VOC formulation meets SCAQMD Rule 1168 and OTC requirements. The bond holds at temperatures over 200°F. The product is postformable, meaning a bonded laminate can be shaped after assembly.

What Are the Best Applications for Marine Spray Adhesive?

Marine interiors and decorative fabrication: bonding laminates and veneers, boat headliners, upholstery, fabrics, foam, fiberglass, glass, cork, and particle board. For general shop contact bonding see 1603-A General Purpose. For vacuum infusion layup see 1601-A or 1602-A.

How Should Marine Spray Adhesive Be Used for Best Results?

Apply using the pebble spray pattern for even coverage, allow to reach tack, then bond. Its postformable nature allows shaping of bonded laminates after assembly. 1604-A is flammable (DOT). Use adequate ventilation and keep away from ignition sources.

LEED Compliance

1604-A is LEED compliant across the following credits:

LEED Schools EQ Credit 4.0
LEED Core and Shell EQ Credit 4.0
LEED ND and CI EQ Credit 4.1
LEED EB MR Credit 3.0
MR Credit 5.1 (evaluated per specific project)

Technical Specifications

Type: Zero-VOC industrial strength contact adhesive
Compliance: Zero VOCs, SCAQMD Rule 1168, OTC, LEED compliant
Temperature resistance: Over 200°F
Bonds: Laminates and veneers, fiberglass, glass, upholstery, fabrics, foam, headliners, cork, particle board
Properties: Water resistant, postformable, fast tack
Spray pattern: Pebble
Handling: Flammable (DOT)

Available Sizes and SKUs

1604-A — Can, 13 oz
1604-B — Case, 12 cans

KEY FEATURES

No VOCs
SCAQMD Rule 1168 Compliant
OTC Compliant
Flammable DOT
Postformable
Fast Tack
High Temperature resistance
Pebble spray pattern
LEED Compliant
LEED Schools EQ Credit 4.0
LEED Core & Shell EQ Credit 4.0
LEED ND & CI EQ Credit 4.1 - LEED EB MR Credit 3.0
MR Credit 5.1 (specific projects must be evaluated)

Every product Fibre Glast sells is First Quality Guaranteed, so you can bond marine and decorative work with confidence.

Data Sheets

Aerosol Adhesives Line Product Data Sheet Safety Data Sheet

Shipping

1604-A Marine Adhesive can be shipped via standard ground service without hazard charges within the 48 contiguous United States. 1604-A Marine Adhesive can not shipped by air.