Corrosion-Resistant Vinyl Ester Resin
For orders placed before 2:30PM EST
WARNING: This product can expose you to chemicals including Styrene, and Benzene, which are known to the State of Californiato cause cancer and Ethylene Glycol, Benzene, and Toluene which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.govnings.ca.gov.
Corrosion Resistant and Blended for Toughness
Our #1110 Vinyl Ester resin is formulated for maximum corrosion resistance to most fuels, vapors, and both acidic and basic chemicals. It is also heat resistant and blended for toughness. These qualities make it perfect for repairing tank linings, blistering boat hulls, as well as fabricating tough all-around parts. The properties of this resin allow it to withstand impacts and repeated flexing without developing cracks.
The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food, as well.
#1110 has a low viscosity, making it perfect for resin infusion applications. It can also be used for hand lay-up or spray applications that require excellent corrosion resistance, impact strength, and tensile elongation.
PLEASE NOTE: Shelf life is limited to 3 months. (Hetron 922)
This resin is formulated for 1.25% MEKP catalyzation. #1110 can be purchased alone or as part of a Resin and Hardener Kit.
#1110/69-F kit contains (1) QUART RESIN, (1) #69-A.
#1110/69-A kit contains (1) GAL RESIN, (2) #69-A.
#1110/69-AK kit contains (4) GAL RESIN, (8) #69-A.
But i would say that it is reliable and very consistent, great working time plenty of time for rolling large panels.
it seems to wet out the same as polyester.
so far very happy with the out come
One clarification i would ask fibreglast to make: The pictures of the kit show mixing by volume. The video however, shows to mix by weight. Clarify one way or the other. I went weight and the curing seems to be good.
Shelf life: I got every bit of 3 months out of the shelf life. Was forced to wait for good weather at one point that made me push it right up to 12 weeks on the shelf.