Fibre Glast Shopping Cart Image
McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Products Category Text

24K Carbon Tow

24K Carbon Tow

Ideal for small, high strength, low weight structures

This tow (or yarn) is composed of 24,000 individual carbon filaments, which boast the highest ultimate tensile strength in the industry. The #2393 is ideal for adding directional reinforcement to fiberglass, KEVLAR®, and carbon components. Use to build out fillets on carbon parts, for spar-wing reinforcement, and pultrusion. It can also be used with a filament winder to create tubes, or used with our #1171-A Air Driven Chopper Gun to create chopped graphite fibers.

It wets out easily with resin. For the highest strength properties, we suggest using epoxy or vinyl ester resin, although polyester resin is also compatible.

Fibre Glast is committed to ensuring that every roll of tow we handle is First Quality and manufactured to the highest standards, so that you can expect the same properties and handling characteristics every time you order.
Fibre Glast First Quality Guaranteed Logo

Roll (pre-cut lengths)

Description Item # Price Qty
50 yd Roll
2393-A $14.95
100 yd Roll
2393-B $24.95
250 yd Roll
2393-C $49.95
6" Swatch
2393-SWATCH $2.95

Related Items
Gun Roving
Available in 40-pound Rolls

This versatile roving chops cleanly, and wets rapidly and completely. It is meant to be used with resin to create high-strength, low-weight composites.
  • Feed through our #1171-A Air Chopper Gun and use in spray up systems, either filled and unfilled.
  • Add directional reinforcement to other structures.
  • Use with a filament winder to create tubes, filament winding, fillets, and spar wing reinforcement.
  • It is typically used with polyester or vinyl ester resin.
  • Yields approximately 205 yards per pound.
Chopper Gun
Quick Glass Build Up

Our 1171 is a hand held, variable speed air powered chopper gun that is primarily used for coating molds or parts with fiberglass or carbon fiber reinforcement. Continuous glass roving is fed into the rear of the gun. The gun then chops the roving into short pieces and deposits them onto the mold. Resin is then applied by brush, roller or sprayed on using a cup gun.

By altering the number and location of chopper blades, the length of the fibers can be varied from 4" down to 5/16". This gun will deposit the equivalent of one layer of 1 oz mat onto a vertical surface without fall-off before wet-out. Ideally suited to quick mold or part build-up once the first layer or two are in place.

Use a fiberglass saturation roller to remove trapped air. New design increases cutter head surface by 32% and increased quantity of chopped material between blade replacements by 33%. Our 1171 chopper gun is compatible with our #522 Gun Roving and #2293 24K Carbon Tow.

Customers Who Bought This Item Also Bought:

Fibre Glast Blog  Materials Calculator  Shipping Information  ISO Certification
Fibre Glast Development Corp.
385 Carr Drive
Brookville, OH 45309
Phone: 800-838-8984
Fax: 937-833-6555

Visa, MasterCard, Discover, American Express, & Purchase Orders Gladly Accepted