Forget the jagged cuts and snagged yarns caused by scissors. Rotary cutters peform a smooth, clean cut and slice through fiberglass and graphite reinforcements in a snap. Simply squeeze the handle to move the blade into cutting position, lock it into place, and slice away. When finished, the blade locks back out of harm's way for safe storage.  

This fabric is identical to part# 543, 7781 E-Glass but is pre-impregnated with an epoxy resin system. The material can be stored, shipped and handled at room temperatures and is cured using a ramp up schedule requiring at most 310°F. Resin content 27.0% - 33.0%

Kevlar® pulp is the lightest of the fillers and highly abrasion resistant. Areas of high impact can easily be reinforced with this strong and durable material. Also, use it to make beveled fillets along edges of honeycomb cores to smooth the transition of fabric skins. Recommended for use with epoxy or vinyl ester resin. 

20% Off An inexpensive gel coat gun for spraying small to medium size molds. Avoids the high cost of catalyst injector systems and at the same time avoids the pitfalls of a regular spray gun. The resin and catalyst are mixed in the disposable paper cups, the lid and nozzle assembly are pressed on, and the cup is then placed on the gun. With the paper cup in a level position, depress the trigger and the air stream picks up the gel coat and provides a uniform, high velocity spray pattern. To clean up, merely remove the cup form the gun, and just clean the lid and nozzle. Cup capacity is one quart. We ship the gun with a 3/16" ID nozzle, but others are available.Pressure required –60 - 100 psi Air consumption – 5.8 CFM at 80 psi Compressor required – 5 HP Air connection - 1/4" TPR Dry weight – 2.0 lbs

This unidirectional is made without the typical hot melt process. Consequently, there is no crimping of the fibers and only minimal binder is used. This results in the highest property unidirectional dry reinforcement available. The 9 oz is used in many marine applications such as boat hulls, as well as hockey sticks and bicycles. The Intermediate Modulus 4.3 oz Uni is used in aerospace and racing applications where maximum single directional properties are critical. 12" wide.  

Give your hands a break and take the strain out of cutting. These electric shears make quick work of fiberglass and carbon fiber fabrics at the push of a button. Its unique blade configuration cuts fabric with ease but can't cut your fingers. Rechargable battery provides hours of use between charges and eliminates the need for awkward or restrictive power cords. Ships complete with two sets of blades, rechargable battery, battery charger, AC adapter, and transformer. See bottom of this page for parts and accessories for the EC Cutter.

A Great Starter Pump! Rated for continuous operation, this oilless pump is wired for immediate use in a standard 110 outlet. Supplied with a barb fitting which ensures secure coupling to #893 vacuum tubing. The only assembly required is the attachment of feet which are also supplied with the pump. Suitable for parts up to 30-40 sq ft. 1/16 HP, 24" Hg, .5 CFM Diaphragm Pump comes with Unlimited One Year Warranty.

Graphite Tapes are ideal for selective reinforcement of graphite fabrications, sleeve winding, lap joining, and repairs of cracks on graphite surfaces.