Details
Extreme Conformability for High-Temperature Applications
High Temperature FEP (Fluorinated Ethylene Propylene) Release Films are extremely durable and highly conformable. These films are designed to be in direct contact with your laminate. Due to its superior non-stick performance, FEP is especially easy to pull from your part once vacuum bagging is complete. These high elongation release films are more pliable than other release films and are suited for use in temperatures up to 500°F. Our High Temperature Release Films are available in two different styles:
- #3782 is a solid sheet with no perforations, so resin content for your laminate can be more closely controlled. The resin in your part stays in your part. Available in a 60” wide sheet.This film will come in either red or violet color.
- #3787 is perforated with 0.015” diameter holes across the surface, spaced in ½” increments. Perforations allow excess air and resin to pass through which makes it well suited for vacuum infusion. Available in a 60” wide sheet.
Both styles can be used with all of the resins on our website, including epoxy, polyester, and vinyl ester
Specifications
| Tensile Strength | 3,500 psi |
| Elongation at Break | 300% |
| Tensile Modulus | 70,000 |
| Thickness | 0.001in ± 0.0005 in |
Shipping
Rolled fabrics ship in a long (45", 53", or 62") box.Sizes
High Temperature Release Film - Perforated & Non-Perforated.
These release films are sold by the linear yard, either as a prepackaged quantity or by continuous yardage.
Prepacks
These release films are available in pre-cut lengths that measure one yard (#3782-A, #3787-A), three yards (#3782-B, #3787-B), and five yards (#3782-C, #3787-C).
Each is packaged and sold separately. For your convenience, these "prepacks" can be purchased in any combination. However, if the length for any one cut of film totals 10 yards or more, we suggest you purchase it in continuous, "cut to length" yardage. Continuous, "Cut to Length" Yardage. If you know in advance that you intend to purchase 10 yards or more of any one release film, it should be ordered in continuous, "cut to length" yardage.
In this case, fabric will be cut once according to the total yardage ordered, and customers receive a price-per-yard discount as compared to prepacks. Quantity discounts continue to deepen as the yardage increases for any one cut of one fabric.-2.jpg)
