Details
Dual-Purpose Undercoating System
ChromaGlast™ High Solids Primer Surfacer Sealer is a dual-purpose undercoating system that can be used as a Primer Surfacer for rougher finishes and mixed materials, but can also be used as a premium pigmented Primer Sealer on ready-to-coat finishes. The first-class epoxy-based formula is designed to protect composite and metal substrates from corrosion and chemicals, while providing excellent paint adhesion and consistency. Application is also flexible, as this primer is easy to mix and can be sprayed, brushed, or rolled onto the substrate.
As a dual purpose product, the high solids formula can be sprayed or rolled as a Primer Surfacer (3-5 coats) for surfaces that need some sanding and finishing before coating, without the need for additional sealer. Or, spray as a Primer Sealer (1-2 coats) for smooth Class A surfaces that are ready to coat, while providing a base tint for your color. ChromaGlast™ #5060 Primer features a low 2.1 VOC (max).
This premium primer is available in White (#5060), Gray (#5062), and Black (#5064) to best compliment your top coat color with less paint coats. A simple 1:1 mix ratio is used with the specialized hardener (#5061).
Features
- Can be applied over fiberglass, composites, cured finishes, steel, aluminum, galvanized, stainless steel, and OEM finishes
- Ensures a smooth, beautiful paint finish
- Builds easily without sagging
- Outstanding corrosion and chemical resistance
- Three shades available (white, gray, and black) for accurate paint coat color accuracy
- Low VOC formula (2.1 Max)
Tips
- 1 mil of primer will provide coverage up to 752 ft² per ready-to-spray gallon. Use up to 3-5 coats for a net 8 mil (dry) as a primer surfacer, or 1-2 coats for a net 3.3 mil (dry) is as a primer sealer.
- Aluminum and carbon steel metals must be primed immediately after cleaning and sanding
- Use a HVLP paint gun with a 1.3~1.6-mm spray tip for best spraying results
- Prep your bare metal surfaces using 80-240 grit sandpaper; old finishes can be prepped with 220-320 grit sand paper, wet or dry.
- Use White for white, yellow, and orange paint. Use Gray for medium red, purple, green, and blue shades. Use black for black, brown, violet, and other darker shades of paint.
Specifications
Dry Time (Dust Free) |
60 minutes |
Print Free Time |
60-90 minutes at 70°F, 25 minutes at 140°F (Sealer) 90-120 minutes at 70°F, 25-60 minutes at 140°F (Surfacer) |
Tape Time |
3.5-5.5 hours at 70°F, 30 minutes at 140°F (Sealer) 5-8 hours at 70°F, 45 minutes at 140°F (Surfacer) |
Overcoat Time |
1 hour to 4 days |
Pot Life |
5 hours |
Coverage |
Up to 752 ft² per gallon RTS |
Solids Volume |
54.25% by weight |
Guarantee
Fibre Glast is committed to ensuring that every chemical and resin we handle is First Quality and manufactured to the highest standards, so that you can expect the same properties and handling characteristics every time you order.
Click here for more information on our First Quality Guarantee.

Data Sheets
Product Data Sheet#5060 Safety Data Sheet
#5061 Safety Data Sheet
#5062 Safety Data Sheet
#5064 Safety Data Sheet