Details
Required for ChromaGlast Paints
This Paint Hardener is made exclusively for our ChromaGlast™ Premium Paint for Fiberglass and Composites. It is packaged into a convenient 8 oz bottle for easy measuring into your ChromaGlast™ paint mix. For every ¾ quart of paint, simply use one bottle of hardener, or otherwise a 3:1 ratio for any quantity.
ChromaGlast™ is the best solution for beautifying and protecting your composite project. It is compatible with fiberglass, carbon fiber, Kevlar, and prepared metal surfaces. This premium paint is a Urethane-based system developed by PPG, so it will hold up to years of use and abuse. It is also painter-friendly—simply mix the paint with the hardener and drying accelerator, and spray in a single coat just as you would most any paint. It will not sag and it builds up clean.
Features
- Ideal mid-rate cure time compatible with all environments
- Premeasured 8 oz bottles
- Designed for use with all high-gloss ChromaGlast Paints
- Metal container can be resealed when mixing small volumes of paint
- Low VOC formula (2.8 Max)
Tips
- Paint will not ever cure without the hardener
- Mix at same time as drying additive, solvent, and paint
- Check pot life and dry time before mixing
- Not for use on “below the waterline” marine applications
Specifications
When mixed with paint
|
|
Dry Time (Dust Free)
|
30-60 minutes full gloss
|
Tape Time
|
3 hours at 70°F, 40 minutes at 140°F
|
Overcoat Time
|
30 minutes to 8 hours
|
Pot Life
|
4-5 hours
|
Guarantee
Fibre Glast is committed to ensuring that every chemical and resin we handle is First Quality and manufactured to the highest standards, so that you can expect the same properties and handling characteristics every time you order.
Click here for more information on our First Quality Guarantee.