Polyester Molding Resin - Clearance

For orders placed before 2:30PM EST
WARNING: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
General Purpose Resin for Part/Mold Fabrication
#77 Molding Resin is ideal as a orthophthalic fiberglass resin for general purpose part fabrication and for building low cost molds. It features an internal thickening agent which results in a high thixotropic index. This prevents drainage when applied to vertical surfaces, yet this polyester resin retains the low viscosity required for rapid wet out. As a first quality resin, the color, consistency, and properties of this resin will not vary from batch to batch. #77 Orthophthalic Polyester Resin is easy to work with and since it is wax free, you don't have to sand between coats.
As a wax-free resin, air must be inhibited during the cure cycle for repairs, single or thin layer applications. To inhibit air we recommend either adding Styrene Wax to the resin, or spraying the applied resin with a coat of PVA. If air isn't inhibited, the resin may not properly cure and remain tacky. For thick or multiple layer applications the heat generated during the exotherm will allow the resin to cure fully.
#77 Polyester resin is formulated for 1.25% MEKP catalyzation. This resin can be purchased alone or as part of a Resin and Hardener Kit.
#77/69-F kit contains (1) QUART RESIN, (1) #69-A.
#77/69-A kit contains (1) GAL RESIN, (2) #69-A.
#77/69-AK kit contains (4) GAL RESIN, (8) #69-A.