High Temp Epoxy Surface Coat - Clearance

Same Day Shipping

For orders placed before 2:30 p.m. ET

Pricing

  • Item
  • Description
  • Price
  • Qty
  • CC-05753
  • CC-05753
    Quart Kit - Expired Shelf Life
  • $89.97

Details

Dissipate Heat and Extend the Life of your Mold

To get the best performance in high temperature service applications, use High Temp Epoxy Surface Coat. Our #1096 High Temp Epoxy Surface Coat is a two-part, low viscosity thixotropic system. It is smooth and creamy, allowing it to be spread on complicated surfaces without losing detail or trapping air bubbles. This aluminum filled epoxy surface coat system is designed for demanding tooling applications with frequent intermediate/high temperature exposure. It is well suited to resist cracking and surface crazing during these temperature fluctuations.

Cure using a ramp up cure schedule requiring at most 300°F

High Temp Epoxy Surface Coat will gel hard at room temperature. However, for applications requiring an elevated service temperature, an oven post-cure schedule is necessary. Before initiating an oven post-cure, allow this surface coat to gel at room temperature.

#1096 High Temp Epoxy Surface Coat is formulated for use with our #3000/3120 High Temp Epoxy Resin. When used together, High Temp Epoxy Surface Coat and High Temp Epoxy Resin can create tough, heat resistant tools. Follow the oven post-cure schedule required by #3000/3120 High Temp Epoxy Resin.

  • Mix Ratio (by weight) – 100:12
  • Pot Life @ 77°F – 25-30 minutes
  • Color – Gray
  • Post Cure Cycle – Hold for 3 hours each @ 150°F, 250°F, or 300°F
  • Maximum Service Temperature - 260ºF

One "Quart Kit" includes one quart each of Parts A and B. One "Gallon Kit" includes one gallon each of Parts A and B.

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you.

Shipping

High Temp Epoxy Surface Coat quart (#1096-A), quart case (#1096-B) and gallon (#1096-C) kits can be shipped via standard ground service without hazard charges within the 48 contiguous United States. All sizes of #1096 will be subject to a hazard charge if shipped by air. Please see our Hazardous Shipping Chart for more information about hazard fees. We will consolidate items whenever possible to minimize these fees.

Sizes

High Temp Epoxy Surface Coat This surface coat is a two-part kit, meaning it is one product made up of two containers. It is available in sizes that include: One quart kit (#1096-A). Part A comes in a one quart container; Part B comes in a 1/2 pint container. One gallon kit (#1096-C). Part A comes in a one gallon container; Part B comes in a quart container. High Temp Epoxy Surface Coat is also available by the case (#1096-B) which contains a six-count of one quart kits.

Product Q&A

Videos