Carbon Fiber Veil, 35.5 Wide - Clearance
For orders placed before 2:30PM EST
WARNING: This product can expose you to chemicals including Formaldehyde, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Corrosion-Resistant, Sandable Surface Layer
0.2 oz, 35.5" Wide, 0.0021" Thick
This veil mat is a thin ply of continuous strand fibers that are looped randomly throughout the roll of the material. It is held together with a light binder and is the consistency of tissue paper—it is not intended for structural use.
Carbon Fiber Veil is ideally suited for several applications:
- Place it in a mold directly behind the surface coat to minimize the print-through of the heavier reinforcing cloths applied later. It will permit surface sanding of finished parts without compromising the reinforcing fabric below.
- Use it with sandwich cores. Place veil mat directly over the core to optimize bond-line thickness. In this case, it's also effective at keeping excess resin from draining into cells of honeycomb cores when a vacuum is not being used.
- Use for applications where corrosion-resistant barriers are required. The non-woven construction of the graphite veil allows a resin-rich surface that increases chemical stability and reduces the risk of micro-cracks forming in the composite surface.
- Carbon veils can also be used for grounding a composite structure, minimizing the build-up of static electricity that could prove dangerous when in contact with explosive liquids and gases.
Carbon Fiber Veil is compatible with polyester, vinyl ester, and epoxy resins. Fibre Glast is committed to ensuring that every roll of fabric we handle is First Quality and manufactured to the highest standards, so that you can expect the same properties and handling characteristics every time you order.
Typical full roll length is 125 yards.
All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you.