Duratec Gray Surfacing Primer - Clearance
For orders placed before 2:30PM EST
WARNING: This product can expose you to chemicals including Cobalt [II] oxide, Methanol, and Styrene, which are known to the State of California to cause cancer and developmental harm. For more information go to www.P65Warnings.ca.gov.
Easy-Sand, Best Choice Primer for Plugs and Molds
Duratec® Gray Surfacing Primer is the best choice for coating your plug or reconditioning your mold. It is suitable for use with wood, MDF, tooling board, composite plugs, patterns, and models. It will even bond to epoxy laminates.
The unique air-cure technology allows fast cure even with thin coats. However, it can be applied as heavily as 45 mils to fill fabric pores on plugs or over repairs. To reach your desired spray viscosity, you can thin 5%-15% with #2306 Duratec Thinner if necessary.
Duratec Surfacing Primer offers a high heat distortion temperature and minimal shrinkage. By minimizing shrinkage, repairs are easily hidden. It sands easily and can be polished to a Class 'A' mirror finish.
Requires 2% MEKP.
All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you.