Duratec Clear Hi-Gloss Gel Coat Additive - Clearance
For orders placed before 2:30PM EST
WARNING: This product can expose you to chemicals including Cobalt [II] oxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Improve Gloss and Get an Open-Air Cure
Duratec® Clear High Gloss Additive can be mixed in a 1:1 ratio with regular gel coat to reduce viscosity and porosity, improve gloss level, and permit a complete open-air cure. It can also be blended with a 15% ratio to tooling gel coats to upgrade mold surfaces, improve gloss retention, increase impact resistance, and reduce heat distortion.
The reduction in viscosity allows gel coats to be sprayed controllably through siphon and HVLP equipment, reducing sanding and polishing time. When used for repairs, this product will result in a low porosity surface.
PLEASE NOTE: When making below-the-waterline repairs on boats, we recommend adding our #71 Styrene Wax to maximize hardness.
Requires 2% MEKP.
All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you.