System 3000 High Temp Epoxy - Clearance

Same Day Shipping

For orders placed before 2:30 p.m. ET


  • Item
  • Description
  • Price
  • Qty
  • CC-05581
  • CC-05581
    120 Min. Hardener - 1/2 Pint - Expired Shelf Life
  • $20.97
  • CC-05933
  • CC-05933
    120 Min. Hardener - 1/2 Pint - Expired Shelf Life
  • $23.97


Clearance - Shelf Life

For tooling and components that will operate in intermediate/high temperature service environments, use this High Temp Epoxy Resin. When post-cured, this unfilled, amber epoxy laminating resin system offers maximum stability in service applications involving frequent heating and cooling cycles. #3000/3045 High Temperature Epoxy Resin easily wets-out reinforcing fabric for quick, stable fabrications.

Cure using a ramp up cure schedule requiring at most 300°F

For maximum stability in any application, an oven post-cure is strongly recommended. This epoxy laminating system will gel hard in 18 to 24 hours at 77°F, but for applications where continuous service temperature is over 250°F, a post-cure is mandatory. Allow the High Temperature Epoxy Resin to gel at room temperature before initiating an oven post-cure.

#3000/3045 High Temp Epoxy Resin can be used with #1096 High Temp Epoxy Surface Coat. When used together, High Temp Epoxy Resin and High Temp Epoxy Surface Coat can create tough, durable, heat resistant tools.

  • Mix Ratio (by weight) – 100:16
  • Pot Life @ 77°F – 45-50 minutes
  • Color – Amber
  • Maximum Service Temperature – 270ºF
Post Cure Cycle
  1. Ramp up temperature at a rate of no more than 2-5°F per minute.
  2. Hold @ 150°F, 250°F, and 300°F for 3 hours each.
  3. Ramp down temperature to 100°F at a rate of no more than 2-5°F per minute. Do not shut down the oven and leave to cool.

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you.


High Temp Epoxy Resin - 45 min cure quart (#3000/3034-A), gallon (#3000/3045-B), and 5-gallon (#3000/3045-C) kits can be shipped via standard ground service without hazard charges within the 48 contiguous United States. All sizes of #3000/3045 (quart, gallon, and 5-gallon kits) will be subject to a hazard charge if shipped by air. Please see our Hazardous Shipping Chart for more information about hazard fees. We will consolidate items whenever possible to minimize these fees.

Product Q&A