High Viscosity Epoxy Surface Coat - Clearance

Same Day Shipping

For orders placed before 2:30 p.m. ET


  • Item
  • Description
  • Price
  • Qty
  • CC-05751
  • CC-05751
    Quart Kit - Expired Shelf Life
  • $62.97


Formulated for Strong Interlaminar Bonds

Our #1099 High Viscosity Epoxy Surface Coat is a white, thickened epoxy material used to create the durable surface coat on room temperature epoxy molds. This surface coat can be brushed on, but spreading with a squeegee is recommended. Due to its higher viscosity, it can be applied in thicker films without developing runs or sags. It is specially formulated to provide strong inter-laminar bonds with the reinforcing materials, even if it is left unsupported overnight. #1099 resists chipping and cracking, and retains its high gloss.

• It is often chosen for broad, flat tooling surfaces where it can be applied quickly.

  • Mix Ratio (by weight) – 100:11
  • Pot Life – 20-25 minutes
  • Color – White

All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you.

warning WARNING: This product can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.


High Viscosity Epoxy Surface Coat quart (#1099-A) and quart case (#1099-B) kits can be shipped via standard ground service without hazard charges within the 48 contiguous United States. Both kit sizes of #1099 will be subject to a hazard charge if shipped by air. Please see our Hazardous Shipping Chart for more information about hazard fees. We will consolidate items whenever possible to minimize these fees.


High Viscosity Epoxy Surface Coat This surface coat is a two-part kit, meaning it is one product made up of two containers. It is available in a one quart kit (#1099-A). A Side comes in a one quart container; B Side comes in a 1/2 pint container. High Viscosity Epoxy Surface Coat is also available by the case (#1099-B) which contains a six-count of one quart kits. *Quantity discounts are available when four or more cases are purchased in one order.

Product Q&A