Details
Spray on Styrofoam™ to Create a Plug
Duratec® StyroShield Primer is a polyester primer that is meant to be applied directly to polystyrene foam (also known as Styrofoam™). StyroShield contains microspheres that, when cured, insulate and protect polystyrene foam from the chemicals in polyester-based laminating resins, gel coat, and other Duratec products. With StyroShield, low-cost polystyrene can be substituted for urethane foam in plug, mold, and pattern-building applications.
Spray StyroShield using an HVLP gun with a 2.5 mm or larger nozzle. Apply at least 20 mils of StyroShield to ensure complete coverage and surface protection.
When in storage, the microspheres in StyroShield will float to the top and form a hard crust, so thorough mixing is required prior to use. When possible, store StyroShield Primer container upside down.
Requires 2% MEKP.
All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you.
WARNING: This product can expose you to chemicals including Styrene & Talc containing asbestiform fibers, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
