Non-Silicone High Temp Paste Wax - Clearance
For orders placed before 2:30PM EST
Mold Release for High Working Temps
This High Temp Paste Wax is specifically designed to release epoxy and polyester—for application temperatures ranging from 75° to 375°. Fabricators can apply this wax to polyester, epoxy, steel, and aluminum molds with assurance of no silicone contamination.
Special preparation is required when using on a new mold:
- Apply a minimum of three layers of Non-Silicone High Temp Paste Wax, each four to six hours apart.
- Select an area of four square feet, and rub on the creamy wax with a clean terry cloth. Before it dries, use a separate cloth to break the surface film.
- After waxing, buff the entire surface until the wax is clear.
All Clearance Corner inventory is controlled and maintained through this website. Therefore, all Clearance Corner items must be ordered through this website (No phone / fax / email orders permitted). Each Clearance Corner product is available in limited quantities on a one-time, first-come-first-serve basis. The first customer to fully complete their online order will receive the Clearance Corner product. NOTE: Simply adding a Clearance Corner product to your online shopping cart will not reserve its inventory for you.