| |
|
|
|
Vinyl Esters Resins & Hardener |
|
|
|
|
|
 |
General Purpose Vinyl Ester Resin |
| Tough and Corrosion Resistant |
This vinyl ester resin is formulated for maximum corrosion resistance to most fuels, vapors, and both acidic and basic chemicals. It is also heat resistant and blended for toughness. These qualities make it perfect for repairing tank linings, blistering boat hulls, as well as fabricating tough all-around parts. Catalyze with 1.25% MEKP, Shelf Life Limited to 3 months.
Requires 1.25% MEKP.
1110/69-F kit contains (1) QUART RESIN, (1) 69-A.
1110/69-A kit contains (1) GAL RESIN, (2) 69-A.
1110/69-AK kit contains (4) GAL RESIN, (8) 69-A. |
|
|
 |
MEKP Hardener |
| Industry Standard |
|
#69 MEKP is required with all Polyester Resins, Gel Coats and Vinyl Ester Resin. It is required in different concentrations as defined for each resin product. Each resin product is available as a kit with the correct amount of hardener. However, hardener may be purchased individually as shown here. |
|
|
 |
MEKP Dispenser |
| Shop Favorite |
| This unique bottle holds 16 oz. of MEKP and is adjustable to accurately dispense from 2.5 to 35 cc. Simply squeeze the bottle until the upper vial is full then release pressure on the bottle leaving a precisely measured amount of catalyst in the vial. The MEKP can then be poured out with no dripping. |
|
|
 |
MEKP Caps |
| Safe and Convenient |
| Perfect for screwing onto our 1oz MEKP bottles! These caps eliminate messy pouring, allow measurement by drops and can be capped for clean storage. |
|
|
 |
Resin Pumps |
| Pumps Any Resin, Any Ratio |
Eliminate messy cans, drips and spills. Easy single stroke pumps fit right into cans with accurate dispensing every time! To use with 3 to 1 mix, simply depress the pump 3 times for resin and once for cure. Clean with acetone between uses.
Different cans have different sized lids. Be sure to purchase the correct pump for your can! Our 824-A Resin Pump will fit only quart and gallon containers. For 5-gallon pails, our 823-A Resin Pump contains a wider lid and extended shaft attachment. |
|
|
|
|
Help
Area 
