| |
|
|
|
 |
1 oz Graduated Cups, Solvent Proof |
| |
| |
|
|
 |
MEKP Dispenser |
| Shop Favorite |
| This unique bottle holds 16 oz. of MEKP and is adjustable to accurately dispense from 2.5 to 35 cc. Simply squeeze the bottle until the upper vial is full then release pressure on the bottle leaving a precisely measured amount of catalyst in the vial. The MEKP can then be poured out with no dripping. |
|
|
 |
MEKP Caps |
| Safe and Convenient |
| Perfect for screwing onto our 1oz MEKP bottles! These caps eliminate messy pouring, allow measurement by drops and can be capped for clean storage. |
|
|
 |
3 cc Syringe with Small Needle for Low Viscosity Materials Only. |
| |
| |
|
|
 |
30ml Syringe w/o Needle |
| Will accept 1/8" I.D. tubing or # 106 needles. |
| 30 ml Syringe Without a Needle. Will Accept 1/8" I.D. Tubing or # 106 Needles. |
|
|
 |
Plastic Funnels |
| Will stand up to resins or acetone! |
| Funnels are always handy in a composite shop. Large funnels facilitate pouring from 5 gallon pails and small funnels control pours from high viscosity materials like epoxy resin when measuring. |
|
|
 |
Graduated Measuring Cups |
| |
| For pouring, scooping and measuring, these handy cups are ideal for resins, foam, fillers or mixes. |
|
|
 |
Gel Coat Thickness Gauge |
| The only way to know wet gel coat mil thickness |
| This simple tool can save hundreds of dollars in damaged material and labor. This is the only accurate method to determine gel coat thickness, and to achieve repeatable high quality results. Place the edge into the wet film, the last tooth marked is the thickness.
|
|
|
 |
Resin Pumps |
| Pumps Any Resin, Any Ratio |
Eliminate messy cans, drips and spills. Easy single stroke pumps fit right into cans with accurate dispensing every time! To use with 3 to 1 mix, simply depress the pump 3 times for resin and once for cure. Clean with acetone between uses.
Different cans have different sized lids. Be sure to purchase the correct pump for your can! Our 824-A Resin Pump will fit only quart and gallon containers. For 5-gallon pails, our 823-A Resin Pump contains a wider lid and extended shaft attachment. |
|
|
 |
Digital Scale |
| Get the Perfect Mix Every Time |
| This versatile scale is the most accurate way to measure resin, regardless of the mix ratio. Also, weigh your dry fabric and only mix enough resin to achieve the desired 40-50% hand lay-up ratio. This scale will measure up to 5lbs or 2000g with accuracy to 0.1 oz/2g. Measure the resin, re-zero (tare) the scale, and pour in the proper amount of hardener. Mixing couldn't be easier. |
|
|
 |
Spigots |
| Easy drum pouring |
| For standard 1" bungs |
|
|
 |
Teaspoon/ Tablespoon Measuring Set |
| Measure Fillers and MEKP |
| #55 is for both teaspoon and tablespoon measurements in one tool. Will not stand up to acetone. |
|
|
|
|
First
Quality
Help
Area 
