| |
|
|
|
 |
Duratec Clear Hi-Gloss Gel Coat Additive |
| Spray Gel Coat Like Paint |
#1040 can be mixed 1:1 with regular gel coat to reduce viscosity, porosity, and permit a complete open air cure. The reduction in viscosity allows gel coat to be sprayed controllably through siphon and HVLP equipment, reducing sanding and polishing time. Below the waterline repairs still need the addition of #71 Styrene Wax for maximum hardness.
Requires 2% MEKP.
|
|
|
 |
Duratec Gray Surfacing Primer |
| Perfect for Plug Finishing and Hiding Repairs |
Duratec Surfacing Primer is the best choice for coating your plug or reconditioning your mold.Thin 5%-15% if necessary to a desired spray viscosity with #2306 Duratec Thinner
after catalyzing. This surface primer can be applied as heavily as 45 mils to fill fabric pores on plugs or over repairs. With a higher heat distortion temperature, shrinkage is reduced.
This further hides the repair.The gray primer sands easily and is then buffed to a Class 'A' mirror finish before building the mold.
Requires 2% MEKP.
|
|
|
 |
Duratec Thinner |
| |
Enhance the flow and leveling properties of #1041 Duratec Gray Surfacing Primer. This thinner reduces orange peel and porosity while allowing for a smoother spray flow.
Add 5%-15% thinner to #1041 Duratec Gray Surfacing Primer after catalyzing.
|
|
|
|
|
Help
Area 
