Our Vacuum Bagging Starter Kit contains everything you need to set up a complete vacuum bagging station. Since all of our fittings, tubing and components fit together perfectly, you can add any additional parts you want. But it is not necessary to buy anything else to get started! You need some type of compressor to supply air. You will also need to have prepared your part and selected all of your vacuum bagging films and materials. This kit contains: (1) #2215-A Small Regulator/Filter to filter air from your source to the vacuum generator and also allows you to dial in the correct air pressure. (1) #2229-A High Efficiency Vacuum Generator pulls a lot of vacuum with a small amount of air! (2) #2217-A air Hose Assemblies, 5 Foot Lengths to connect from your air source to the regulator and from the regulator to the Vacuum Generator. (1) #2218 Vacuum Gauge with T-Fitting allows you to easily monitor vacuum anywhere in your tubing line – put it where you want it! You can measure closer to the pump or right at the part. (10) Feet of #893 Vacuum Tubing (4) #789-A Hose Clamps (1) #891-A Vacuum Coupling