Industry Standard Catalyst
Methyl Ethyl Ketone Peroxide, or MEKP, is required with all polyester resins, gel coats and vinyl ester resin. It is required in different concentrations as defined for each resin product.
Each resin product is available as a kit with the correct amount of hardener. However, hardener may be purchased individually as shown here.
MEKP Hardener gallon (#69-D) and case (#69-E) units are considered hazardous (flammable) and will be subject to a hazard charge if shipped by standard ground.
MEKP 1 oz. (#69-A) unit will be subject to a hazard charge if shipped by air.
MEKP gallon (#69-A) and case (#69-E) units cannot be shipped by air.
Please see our Hazardous Shipping Chart for more information about hazard fees. We will consolidate items whenever possible to minimize these fees.
with the results. So naturally I went back to the same
product and was again pleased with the results.
The small bottles though are difficult to work with and would be great if had a dropper top or something of that nature built in to dispense else when trying to just get a few drops it runs down the side of the bottle.
My solution was a 1ml medical syringe with the needle cut off. A dropper nozzle cap would have solved this more conveniently.
We do offer the 877-A Cap which is a nozzle tip.
MEKP is available in a variety of sizes that include:
One 1 ounce bottle (#69-A)
One gallon (#69-D)
One case of four gallons (#69-E)