#1040 can be mixed 1:1 with regular gel coat to reduce viscosity, porosity, and permit a complete open air cure. The reduction in viscosity allows gel coat to be sprayed controllably through siphon and HVLP equipment, reducing sanding and polishing time. Below the waterline repairs still need the addition of #71 Styrene Wax for maximum hardness. Requires 2% MEKP.

70 Wipes / Canister
SURFASOLVE Waterless Hand Wipes offer a unique chemistry not available with conventional solvents or cleaners. SURFASOLVE Hand wipes use a special dual textured non-scratching towel. The biodegradable formula is powerful enough to instantly remove dirt, ink, resins, caulks, tar adhesives, urethanes, paint, dyes, oil grease and just about anything from hands without having to rinse with water

A special dual textured wipe holds the SURFASOLVE Formula and traps the materials being cleaned within the towel. This prevents the materials from being re-deposited back on the skin. SURFASOLVE Hand Wipes have no harsh citrus solvents or alcohols to dry and chap skin. There is no pumice abrasive in the towels which can scratch and dull skin. After just one use, SURFASOLVE Hand Wipes leave hands feeling soft and smooth not to mention it will remove grime from under finger nails! SURFASOLVE Hand Wipes have a pleasant apple scent that is non-offensive. Wipes contain natural beeswax and emollients to enhance moisture retention of skin.

*For more information see the Product Data Sheet below.

#69 MEKP is required with all Polyester Resins, Gel Coats and Vinyl Ester Resin. It is required in different concentrations as defined for each resin product. Each resin product is available as a kit with the correct amount of hardener. However, hardener may be purchased individually as shown here.