Fibre Glast Shopping Cart Image
 
McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Products Category Text


Black Tooling Gel Coat

Black Tooling Gel Coat
Extend the Durability of Molds 


Tooling Gel Coat is an abrasion resistant gel coat for making molds where gloss retention, superior hardness, exceptional craze resistance and minimum distortion are paramount. Our #186 Black Tooling Gel Coat is often used on molds that will be used to make parts with a white gel coat. The contrast of the colors allows you to gauge the gel coat coverage and tell the difference between the part and the mold. The life of a good polyester mold may be extended considerably by the use of tooling gel coat. For best results, build the film thickness to 20 -25 mils. #1040 Hi-Gloss Additive can be added to further upgrade the gloss.
Formulated for 1.5% - 2.5% MEKP.

186/69-A kit contains (1) QUART RESIN, (1) 69-A.
186/69-B kit contains (1) GAL RESIN, (3) 69-A.
186/69-BK kit contains (4) GAL RESIN, (12) 69-A.
Fibre Glast First Quality Guaranteed Logo




Gel Coat

Description Item # Price Qty
Quart (2 lbs)
186-A $49.95
Gallon (9 lbs)
186-B $159.95
5 Gallon Pail (40 lbs)
186-C $599.95



Gel Coat Kit (with hardener)

Description Item # Price Qty
Quart w/ hardener
186/69-A $51.95

Gallon w/ hardener
186/69-B $164.95

Case (4 Gallons w/ hardener)
186/69-BK $624.95




Related Items
Duratec Clear Hi-Gloss Gel Coat Additive
Spray Gel Coat Like Paint


Our #1039 and 1040 Duratec® Clear High Gloss Additive can be mixed in a 1:1 ratio with regular gel coat to reduce viscosity and porosity while improving gloss level and permitting a complete open air cure. They can also be blended with a 15% ratio to tooling gel coats to upgrade mold surfaces, improve gloss retention, increased impact resistance and reduce heat distortion.

The reduction in viscosity allows gel coats to be sprayed controllably through siphon and HVLP equipment, reducing sanding and polishing time. When used for repairs, this product will result in a low porosity surface.

When making below the waterline repairs, we still recommend adding our #71 Styrene Wax for maximum hardness.
Requires 2% MEKP.
MEKP Hardener
Industry Standard Catalyst


#69 MEKP is required with all Polyester Resins, Gel Coats and Vinyl Ester Resin. It is required in different concentrations as defined for each resin product. Each resin product is available as a kit with the correct amount of hardener. However, hardener may be purchased individually as shown here.
(DDM-9) 
SURFASOLVE Hand Wipes
70 Wipes / Canister
SURFASOLVE Waterless Hand Wipes offer a unique chemistry not available with conventional solvents or cleaners. SURFASOLVE Hand wipes use a special dual textured non-scratching towel. The biodegradable formula is powerful enough to instantly remove dirt, ink, resins, caulks, tar adhesives, urethanes, paint, dyes, oil grease and just about anything from hands without having to rinse with water

A special dual textured wipe holds the SURFASOLVE Formula and traps the materials being cleaned within the towel. This prevents the materials from being re-deposited back on the skin. SURFASOLVE Hand Wipes have no harsh citrus solvents or alcohols to dry and chap skin. There is no pumice abrasive in the towels which can scratch and dull skin. After just one use, SURFASOLVE Hand Wipes leave hands feeling soft and smooth not to mention it will remove grime from under finger nails! SURFASOLVE Hand Wipes have a pleasant apple scent that is non-offensive. Wipes contain natural beeswax and emollients to enhance moisture retention of skin.

*For more information see the Product Data Sheet below.




Customers Who Bought This Item Also Bought:



Fibre Glast Blog  Materials Calculator  Shipping Information  ISO Certification