Item Price Qty
2000-A
Quart (2lbs)
$44.95
2000-B
Gallon (8lbs)
$104.95
2000-C
5 Gallon Pail (40lbs)
$395.95
Quantity Discounts
4+ $ 359.95  
10+ $ 349.95  
2000-Drum
Drum (500lbs)
$3,875.00
2020-A
20 Minute Pot Life - 1/2 Pint
$21.95
2020-B
20 Minute Pot Life - Quart
$44.95
2020-C
20 Minute Pot Life - Gallon
$129.95
Quantity Discounts
4+ $ 127.95  
10+ $ 124.95  
2060-A
60 Minute Pot Life - 1/2 Pint
$21.95
2060-B
60 Minute Pot Life - Quart
$44.95
2060-C
60 Minute Pot Life - Gallon
$129.95
Quantity Discounts
4+ $ 127.95  
10+ $ 124.95  
2120-A
120 Minute Pot Life - 1/2 Pint
$21.95
2120-B
120 Minute Pot Life - Quart
$44.95
2120-C
120 Minute Pot Life - Gallon
$129.95
Quantity Discounts
4+ $ 127.95  
10+ $ 124.95  

Highest Strength Room Temp Epoxy

System 2000 Epoxy Resin is a medium viscosity, light amber laminating resin that is designed to offer the highest ultimate strength for a room temperature epoxy. It is used for fabricating high strength parts and other demanding structural applications. Use this system to maximize the physical properties of carbon fiber, KEVLAR®, and glass laminates! Test results have proven superiority over other room temperature epoxies. Its low viscosity and great handling characteristics make it a favorite in the shop too!

Three high performance hardener systems are available for the System 2000 resin. 20 minute, 60 minute and 120 minute pot life versions are all options. This added variety allows the fabricator to select the system best suited to the size, complexity, or time-frame of the project. Simple parts which need to be demolded quickly should use the 20 minute hardener. Larger and more complex parts can use either of the other hardeners.

Vacuum Bagging applications would typically warrant the longest 2 hour working time. As with any epoxy system, adhere to the proper mix ratios and maintain an adequate curing temperature of at least 70 degrees F. The cure time will be cut in half for every 10 degrees F that the temperature is raised above 70 degrees F. Purchase a single cure, or buy resin in bulk and order a variety of hardeners to keep on hand for any project. 

Chopped strand mat contains a binder which prevents proper bonding with any epoxy resins. Use our polyester or vinyl ester resins with chopped strand mat.

First, select the amount of System 2000 Resin that you will need. Then select your needed curing agent or combination of curing agents. Remember, these are not exact kits, so be sure you have enough Hardener!


Mixing Ratios:

2020 Hardener: 20 Minute Pot Life

Mix Ratio By Weight: 100:23

Mix Ratio By Volume: 4:1

2060 Hardener: 60 Minute Pot Life

Mix Ratio By Weight: 100:27

Mix Ratio By Volume: 3:1

2120 Hardener: 120 Minute Pot Life

Mix Ratio By Weight: 100:27

Mix Ratio By Volume: 3:1


KEVLAR® Fabric is made with genuine DuPont™ KEVLAR® fiber. DuPont™ and KEVLAR® are registered trademarks of E.I. du Pont de Nemours and Company and are used with permission.

System 2000 Epoxy Resin quart (#2000-A), gallon (#2000-B), and 5-gallon (#2000-C) units can be shipped via standard ground service, and by air, without hazard charges within the 48 contiguous United States.



All System 2000 Hardener 1/2 pint (#2020-A, #2060-A, #2120-A), quart (#2020-B, #2060-B, #2120-B), and gallon (#2020-C, #2060-C, #2120-C) units can be shipped via standard ground service without hazard charges within the 48 contiguous United States.

All sizes of System 2000 Hardener (1/2 pint, quart, and gallon) will be subject to a hazard charge if shipped by air.

Please see our Hazardous Shipping Chart for more information about hazard fees. We will consolidate items whenever possible to minimize these fees.

Review star icon Review star icon Review star icon Review star icon Review star icon

Excellent resin
Apr 19, 2015  |  By Vadim Z
Review star icon Review star icon Review star icon Review star icon Review star icon
I'm very pleased with this resin for its high strength, low weight and reliability. It's easy to handle and helps to achieve impressive results at low cost. Perfect choice for model aircraft applications.


System 2000 epoxy resin
Apr 18, 2015  |  By Mark T
Review star icon Review star icon Review star icon Review star icon Review star icon
Very good product. I have used this in the past and was always very pleased with it. I use it for covering my rc airplanes with 3/4 oz glass and it works great for this. I have also used it with carbon fiber tow to make landing gear for a F4U Corsair which turned out incredibly strong. This is the only epoxy I know of that you can't use wax paper as a release film. I have used The West system at work for some things and you can use wax paper to lay down so the epoxy won't stick to it. Not so with System 2000, this stuff even sticks to wax paper. Another plus is the high service temps you can get just with room temp cures. Other epoxies are around 136 F to 164 F but I think this is around minimum 186 F and with certain hardeners around 200 F. This is the only epoxy I buy. The shelf life of only 6 months is a con but I try to plan stuff so that I have plenty of layup work so I use most of it up before it expires.

System 2000 Epoxy Resin

This resin is available in a variety of sizes that include:
One quart (#2000-A)
One gallon (#2000-B)
A five-gallon pail (#2000-C)
One drum (#2000-DRUM)
*Quantity discounts are available on the five-gallon pail only, when four or more units are ordered at one time.

This resin requires hardener, which is sold separately in a variety of pot life cures (#2020 20-minute; #2060 60-minute; and #2120 120-minute).

Videos

Facebook Social Icon
Twitter Social Icon
Instagram Social Icon
Youtube Social Icon