60 Minute Pot Life
Compatible with our System 2000 Epoxy, this medium pot life hardener is ideal for standard part fabrication. #2060 has a one hour working time which eases frantic lay-up schedules and improves quality of most parts.
In sufficient mass, #2060 will cure completely at room temperature (77°F or above). However, when constructing 2 or 3 ply, thin laminates and when overnight demolding and sandability is required, some heat should be applied to the 2060 system. Only moderate heat is required to gel hard, as low as 90°F is usually sufficient. With higher cure temperatures, parts or molds will have a service temperature of over 200°F.
Pot Life: 60 Minutes
Mix Ratio By Weight: 100:27
Mix Ratio By Volume: 3:1