This unique carbon fabric is used in the most demanding applications requiring carbon properties and stiffness at a minimum weight. Plain weave construction provides excellent stability and easy handling.  

This Style 6781 S2-Glass is identical to the Style 7781 E-Glass (#543) except it is woven with superior S-2 fibers resulting in extraordinary strength with a superior look and finish.

(Typical full roll length is 500 yards)

This unidirectional is made without the typical hot melt process. Consequently, there is no crimping of the fibers and only minimal binder is used. This results in the highest property unidirectional dry reinforcement available. The 9 oz is used in many marine applications such as boat hulls, as well as hockey sticks and bicycles. The Intermediate Modulus 4.3 oz Uni is used in aerospace and racing applications where maximum single directional properties are critical. 12" wide.  

3K, 12x12, 5.7 oz/sq yd, 50" Wide. Laminating this carbon fabric really makes the pattern come alive. This pattern is like an optical illusion. In certain light, a maze of cubes zigzag the length of the fabric. The pattern seems to reach crookedly into the third dimension, fascinating anyone who looks upon it.

Graphite Tapes are ideal for selective reinforcement of graphite fabrications, sleeve winding, lap joining, and repairs of cracks on graphite surfaces.

A hand held, variable speed air powered chopper gun for coating molds or parts with glass reinforcement. Continuous glass roving is fed into the rear of the gun. The gun then chops the roving into short pieces and deposits them onto the mold. Resin is then applied by brush, roller or sprayed on using a cup gun. The length of the fibers can be varied from 4" down to 5/16". This gun will deposit the equivalent of one layer of 1 oz mat onto a vertical surface without fall-off before wet-out. Ideally suited to quick mold or part build-up once the first layer or two are in place. Use a saturation roller to remove trapped air. New design increases cutter head surface by 32% and increased quantity of chopped material between blade replacements by 33%. Works with #522 Gun Roving or #2293 24K Carbon Tow.

Kevlar® tape is ideal for selective reinforcement of Kevlar®, fiberglass or carbon laminations and repairs. This plain weave style offers optimum stability and drapeability for wrapping or laying in strips. Highly recommended in lieu of cutting Kevlar® into small strips.

GINGHER® Scissors are lightweight, extremely sharp and comfortable. These 2-1/2 oz. scissors are perfect for use during the lay-up for a variety of purposes and can be soaked in acetone for easy clean up. We recommend saving one pair for only cutting Kevlar® and keeping a second pair for general use.