 |
 |
 |
Braided Sleeves
 |
|
No Seams, No Winding These braided carbon biaxial sleeves have the cosmetically desirable appearance of a 2x2 Twill pattern but as a sleeve, they can be slid over a prepared mandrel or tube to create straight or tapered tubing. The sleeves can be increased from their base diameter up to 30% and decreased up to 70%. This means that a 2" diameter can be used in a single application ranging from 2.6" diameter down to 0.6". Laying up sleeves is predictable, repeatable and suitable for precise manufacture of composite parts.  |
 |
|
2", 9.9 oz/sqyd, 0.018" thick This sleeve offers all of the benefits inherent in Kevlar. Impact and abrasion resistant, this sleeve will also conform to shapes with changing geometries. Great for use in prosthetics, hockey sticks and much more. It can be slid over a prepared mandrel or tube to create straight or tapered tubing. Biaxial sleeves can be increased from their base diameter up to 30% and decreased up to 70%. This means that a 2" diameter can be used in a single application ranging from 2.6" diameter down to 0.6". Laying up sleeves is predictable, repeatable and suitable for precise manufacture of composite parts. |
 |
|
2", 10.4 oz/sqyd, 0.011" thick This sleeve will conform to shapes with changing geometries. Great for use in prosthetics, hockey sticks and much more. It can be slid over a prepared mandrel or tube to create straight or tapered tubing. Biaxial sleeves can be increased from their base diameter up to 30% and decreased up to 70%. This means that a 2" diameter can be used in a single application ranging from 2.6" diameter down to 0.6". Laying up sleeves is predictable, repeatable and suitable for precise manufacture of composite parts. |
385 Carr Drive
Brookville, OH 45309
Phone: 800-838-8984
Fax: 937-833-6555
Email: customerservice@fibreglast.com
