Graphite Tapes are ideal for selective reinforcement of graphite fabrications, sleeve winding, lap joining, and repairs of cracks on graphite surfaces.

#83 is a waxed resin for laminating thin fiberglass skins on plywood, or for general purpose fiberglass repairs. The wax in the resin will prevent surface tackiness even when applied in thin coats. Sand off the wax layer before painting or secondary bonding. Stir thoroughly in can before using.  Requires 1% MEKP.

83/69-A kit contains (1) QUART RESIN, (1) 69-A.
83/69-AK kit contains (12) QUARTS RESIN, (12) 69-A.
83/69-B kit contains (1) GAL RESIN, (2) 69-A.
83/69-BK kit contains (4) GAL RESIN, (8) 69-A.

These first quality, hybrid fabrics offer 3K Carbon in the warp and 1500 Denier Kevlar®in the fill directions for maximum drapability and drop-dead good looks. Use as a single layer for cosmetics only or back with another layer in the cross direction for a maximum balance of properties. The Kevlar®fibers are dyed with red, blue or yellow dyes for eye-catching color.  

#180 Clear Gel Coat is a high performance, premium quality gel coat for both airless and air atomized spray applications. #180 offers UV light stability, excellent clarity, crack and chemical resistance. This deep, crystal-clear and non-yellowing gel coat is compatible with underwater and water contact marine applications as well as sanitaryware such as showers and tubs. It is recommended to be used as a protective clear coat over Chromaveil, other colors or glitterflake. Blend with #1040 Duratec Hi-Gloss Additive when top coating. Requires 1.5% MEKP.

180/69-F kit contains (1) QUART RESIN, (1) 69-A.
180/69-A kit contains (1) GAL RESIN, (3) 69-A.
180/69-AK kit contains (4) GAL RESIN, (9) 69-A.

This 2x2 twill weave fabric offers the cosmetic appearance so desirable on modern composite parts. But don't just use it for looks, this fabric is highly form-able and slightly stronger than the plain weave.

(Typical full roll length is 100 yards)

20% off only in August
Identical to part# 1069, this prepreg offers the advantages of pre-impregnation of an epoxy resin system. The material can be stored, shipped and handled at room temperatures and is cured using ramp up schedule requiring at most 310°F. Resin content 33.00% - 39.0%

Frequently specified in aerospace applications, this fabric offers excellent strength, formability, and surfacing characteristics. Meets MIL-C-9084C, Type VIII-B.

(Typical full roll length is 1000 yards)

Kevlar® tape is ideal for selective reinforcement of Kevlar®, fiberglass or carbon laminations and repairs. This plain weave style offers optimum stability and drapeability for wrapping or laying in strips. Highly recommended in lieu of cutting Kevlar® into small strips.